Weslo WLTL49806.0 user manual

Page 4

20.Do not attempt to raise, lower, or move the treadmill until it is properly assembled. (See ASSEMBLY on page 6, and HOW TO FOLD AND MOVE THE TREADMILL on page 20.) You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.

21.When folding or moving the treadmill, make sure that the storage latch is fully closed.

22.Inspect and properly tighten all parts of the treadmill regularly.

23.Never insert any object into any opening.

24.DANGER: Always unplug the power cord immediately after use, before cleaning the treadmill, and before performing the maintenance and adjustment procedures de- scribed in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing other than the procedures in this manual should be performed by an authorized ser- vice representative only.

25.This treadmill is intended for in-home use only. Do not use this treadmill in a commer- cial, rental, or institutional setting.

WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decals shown here have been placed on the treadmill. If a decal is missing, or if it is not legible, call the toll-free telephone number on the front cover of this manual and order a free replacement decal. Apply the decal in the location shown. Note:

The decals are not shown at actual size.

4

Image 4
Contents QUESTIONS? Model No. WLTL49806.0 Serial NoCall TOLL-FREE Mon.-Fri., 6 a.m.-6 p.m. MSTTable of Contents Important Precautions Page Before YOU Begin Back Right SideTighten the Wheel Nut the Wheel should turn Freely AssemblyScrews are in the indicated holes Base Upright Bolts yet Tighten the Upright Bolts yetFrame Bolt yet Outer side of the Frame Spacer facing33, and a Nut 47 do not tighten the Frame Bolt yet Sembly. Make sure that no wires are pinched Start all four Handrail Bolts before tightening Any of themBolts Side View View from AboveBase Cover not shown in the same way HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Features of the Console Console DiagramHOW to Turn on the Power HOW to USE the Manual Mode Always exercise at a pace that is comfortable for you Measure your heart rate if desiredTurn on the fan if desired Whenkey. you are finished exercising, removeSelect a distance program HOW to USE a Distance ProgramPress the Start button to start the program When the program is completed, remove Key from the console HOW to USE a Step ProgramSelect a step program HOW to USE a Calorie Goal Program Information Mode HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USEProblem The power turns off during use TroubleshootingTop Problem The walking belt slows when walked on Conditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyPart LIST-Model No. WLTL49806.0 Key No. Qty DescriptionRemove this Exploded Drawing and Part List from the Manual R1006A Limited Warranty HOW to Order Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT