Weslo WLTL49806.0 user manual Outer side of the Frame Spacer facing, Frame Bolt yet

5. See the left inset drawing. Identify the two Frame	5
Spacers (34). Open the included packet of		36
grease, and apply grease to both sides of both
Frame Spacers. Then, identify the outer side of				91
each Frame Spacer.
Next, hold a Frame Spacer (34) between the			47
Right Upright (36) and the Lift Frame (59), with			34
the outer side of the Frame Spacer facing the
Right Upright. Attach the Right Upright to the
Lift Frame with a Frame Bolt (32), a Frame					33
Washer (33), and a Nut (47); do not tighten the
Frame Bolt yet.		59
Then, identify the Right Base Cover (91). Slide			28	32
the Right Base Cover onto the Right Upright (36)
and turn it to the position shown.
Pull gently on the upper end of the Upright Wire	34			36
(28) to remove any excess slack.
			47
		Outer
Cut the plastic tie and remove the strap from the
		Side
Upright Wire (28).
				33
					32
		Inner	34
		Side
			59
6. See the left inset drawing. Identify the outer side	6
of the remaining Frame Spacer (34).
Hold the Frame Spacer (34) between the Left		90
Upright (31) and the Lift Frame (59), with the		31
outer side of the Frame Spacer facing the		47
Left Upright. Attach the Left Upright to the Lift
Frame with a Frame Bolt (32), a Frame Washer		34
(33), and a Nut (47); do not tighten the Frame
Bolt yet.	33
Identify the Left Base Cover (90). Slide the Left		59
Base Cover onto the Left Upright (31) and turn it
		32
to the position shown.
	34		31
		Outer		47
		Side
		32	33
		Inner		34
		Side		59
	8