Weslo WLTL49806.0 HOW to Fold and Move the Treadmill, HOW to Fold the Treadmill for Storage

Page 20

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the

lowest position. If this is not done, the treadmill may be per- manently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.

1.Hold the metal frame firmly in the location shown by the arrow at the right. CAUTION: To decrease the possibility of injury, do not lift the frame by the plastic foot rails. To raise the frame, bend your legs, keep your back straight, and lift with your legs. Raise the frame about halfway to the vertical position.

2.Move your right hand to the position shown and hold the treadmill firmly. Using your left hand, pull the latch knob to the left and hold it. Raise the frame until the catch passes the pin on the latch knob, and then slowly release the latch knob.

Make sure that the pin is resting securely against the catch.

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of direct sun- light. Do not leave the treadmill in the storage position in temperatures above 85° Fahrenheit.

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert it to the storage position as described above. Make sure that the pin on the latch knob is resting securely against the catch.

1.Hold one of the handrails and place your other hand on the deck. Place one foot against one of the wheels.

2.Tilt the treadmill back until it rolls freely on the wheels. Carefully move the treadmill to the desired location. To reduce the risk of injury, use extreme caution while moving the treadmill. Do not move the treadmill over an uneven surface.

3.Place one foot against one of the wheels, and carefully lower the treadmill until it is resting in the storage position.

HOW TO LOWER THE TREADMILL FOR USE

Frame

Latch

Engaged

Knob

 

Catch

 

Deck

 

Handrail

 

Wheel

1.Hold the upper end of the treadmill with your left hand. Pull the latch knob to the left and hold it. Pivot the frame downward and then release the latch knob.

2.Hold the metal frame firmly with both hands, and lower it to the floor. CAUTION: To decrease the possibility of injury, do not lower the frame by gripping only the plastic foot rails. Do not drop the frame to the floor. Make sure to bend your legs and keep your back straight.

20

Image 20
Contents QUESTIONS? Model No. WLTL49806.0 Serial NoCall TOLL-FREE Mon.-Fri., 6 a.m.-6 p.m. MSTTable of Contents Important Precautions Page Before YOU Begin Back Right SideScrews are in the indicated holes Base AssemblyTighten the Wheel Nut the Wheel should turn Freely Upright Bolts yet Tighten the Upright Bolts yet33, and a Nut 47 do not tighten the Frame Bolt yet Outer side of the Frame Spacer facingFrame Bolt yet Sembly. Make sure that no wires are pinched Start all four Handrail Bolts before tightening Any of themBolts Side View View from AboveBase Cover not shown in the same way PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord HOW to Turn on the Power Console DiagramFeatures of the Console HOW to USE the Manual Mode Always exercise at a pace that is comfortable for you Measure your heart rate if desiredTurn on the fan if desired Whenkey. you are finished exercising, removePress the Start button to start the program HOW to USE a Distance ProgramSelect a distance program Select a step program HOW to USE a Step ProgramWhen the program is completed, remove Key from the console HOW to USE a Calorie Goal Program Information Mode HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USETop TroubleshootingProblem The power turns off during use Problem The walking belt slows when walked on Conditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyPart LIST-Model No. WLTL49806.0 Key No. Qty DescriptionRemove this Exploded Drawing and Part List from the Manual R1006A Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT HOW to Order Replacement PartsLimited Warranty