Bushnell 11-8313 manual Captured Pictures with BUILT-IN Memory

The loop order of the different modes is shown here:

6.To change settings, toggle through the different modes by pressing the MODE button. When a mode is selected, the indicator symbol on the LCD will appear. You can then select that mode by pressing the SNAP button.

7.When in “Normal” mode, press SNAP to take a picture.

Press SNAP->

8.By pressing the MODE button the camera will enter “Mode Change”.

9.To select “Self-Timer” mode, press MODE and the self -timer mark appears, then press SNAP and the camera will take a picture after a 10 second delay. The camera exits self-timer mode automatically after capture is done and the self-timer mark disappears on the LCD at the same time.

Press MODE->	press SNAP to capture.
3
11-8313 IMAGEVIEW MANUAL	6-7

10.Low Resolution mode, will cause your pictures to be of a lower resolution, but will allow you to store many more pictures in the camera’s memory. The default setting is Hi. To change the resolution, press the MODE button until you see the “mode” icon appears. Press the SNAP button, and Lo will appear. The camera is changed from high resolution to low resolution. Repeat the same steps to change the camera back to Hi resolution mode.

CAPTURED PICTURES WITH BUILT-IN MEMORY:

Pixels (Resolution)	Image Quality	Captured Picture Quantity
1280X1024(Hi)	High Quality (HQ)	Up to 40 pictures
	Low Quality (LQ)	Up to 55 pictures
1024X768(Lo)	High Quality (HQ)	Up to 55 pictures
	Low Quality (LQ)	Up to 85 pictures

11.When in “Normal” mode press the MODE button 3 times to enter the “AVI” mode.

The icon will appear. Press the SNAP button to start AVI capturing, and counting. The resolution for AVI is 320X240 pixies. The memory of the camera can hold from 40-70 seconds of live action. It depends on what objects you are capturing and the lighting conditions.

4

3/11/04, 2:59 PM