
Installation
INSTALLING THE BOOM AND BALL HOOK
1)Remove the ball hook collar, ball hook, and
2)Thread the nut onto the ball hook, then thread the ball hook into the ball hook collar. Do not tighten yet. (Figure 1)
3)Slide ball hook collar onto the end of the boom and leave it loose. (Figure 2)
4)Insert boom with ball hook collar assembly into frame (Figure 3) and line up holes in boom with holes in frame
(Figure 4).
5)Remove
FIGURE 1
FIGURE 2
FIGURE 3
8
FIGURE 4
www.cannondownriggers.com