Beeper Feature, Speed Limits, Big Number Option

2.10 Beeper Feature

The beeper can be activated or deactivated.

To activate or deactivate the beeper:

1.Enter into the Settings menu, see Section 2.1.

2.Select the BEEPER option, and press the JustGo®/ENTER key to accept.

3.Select the mode in which you wish the beeper to be. Choose ON or OFF with the SPEED keys and press JustGo®/ENTER to accept.

From now on, the beeper will be in the selected mode.

2.11 Speed Limits

The MINIMUM and MAXIMUM speeds can be set into the treadmill.

To select this option: Enter into the Settings menu, see Section 2.1.

1.Select the SPEED LIMITS option, and press the JustGo/ENTER key to accept.

Minimum:	0.5 MPH(0.8 KM/H)

Maximum:	10 MPH (16.0 KM/H)

Default:	0.5 to 10 MPH(0.8 to 16 KM/H)

2.Select the MINIMUM OR MAXIMUM value with the ELEVATION INCREASE AND ELEVATION DECREASE keys. To modify the value, use the SPEED INCREASE OR DECREASE keys. Press the JustGo/Enter key to accept (the values will not be considered if you don’t press the ENTER key to accept).

Please refer to the following values to know the possible range of values.

2.12 Big Number Option

The big number option can be to selected to display on the main screen a choice of 7 options.

To select a big number option: Enter into the Setting menu, see section 2.1.

1.Select the BIG NUMBER OPTION, and press the JustGo/ENTER key to accept.

2.Select the option you wish to be displayed on the screen. Choose from, NONE, All, Speed, Distance, Calories, Time or Heart Rate. Press the INCREASE or DECREASE key to select the option.

3.Press the JustGo®/ENTER key to accept.

From now on, all the information will be displayed on screen as the option you selected.

NOTE – The T240 does not allow to choose NONE since it will never display the speed or elevation proﬁles.

2.13 Learn Program (T260)

Bodyguard machines have the incredible ability to learn (pre-program) proﬁles. This is especially useful if you would like to build a workout proﬁle in advance. You now have the ability to build a program without actually doing it. This is great if you are customizing a program for a client for example.

To use learn program: Enter into the Settings menu, see section 2.1.

1.You will be prompted to a screen that will ask you to increase or decrease either Speed and Elevation. Adjust both parameters and see on the side select windows where you are going.

2.Once you are satisﬁed press ENTER to lock it and move to the next SEGMENT.

3.Repeat this procedure until the whole proﬁle has been ﬁlled in.

-You can learn 4 programs in the T260. This option is not available in the T240.

-To use a LEARN program, choose LEARN from the program selection window.