Heart Rate Access Feature

The Heart Rate Access feature allows you to selectively enter into a Heart Rate Control program without quitting your exercise. It will allow you to choose, when you are ready, to change your current workout to a Heart Rate Control. You will need to be wearing the optional wireless chest strap when choosing to use this feature.

The Heart Rate Access feature allows the user to change any program at any time during the selected workout to Heart Rate Control. On screen, you will see the program remaining change to a ﬂat-line as it would look like in a normal Heart Rate Control program. The part of the program that you just did though would remain unchanged.

How to Use Heart Rate Access™

While in a program you would press the JustGo®/ENTER key. On screen you would see the message “Heart Rate Control Activated” followed by a screen showing your target Heart Rate. Once your Heart Rate has been conﬁrmed, the remainder of the selected workout time would be in the form of a normal Heart Rate Control. If you pressed the button and were not wearing a chest strap, the unit will disregard the button push and continue in the normal selected program.

1.JustGo®, Manual, Walk and Cardiovascular programs

•These programs would change SPEED only or ELEVATION only, depending on your selected SETTINGS in Heart Rate Access options.

NOTE – On the T240, it will make speed changes only.

2.Speed Run and Track programs

•These programs will make SPEED changes only.

3.Hill Climb program

•This program will make ELEVATION changes only.

4.Memory programs

•These programs will make changes according to the type of changes that were done in the program that has been recalled from memory. For example, if you did a Speed Run program and you press the JustGo®/ENTER key, you would get SPEED changes only.

NOTE – On the T240, il will make speed changes only.

5.Override

•In all programs, you can make SPEED and ELEVATION changes manually.

6.Saving

•You will also be able to save any program at the end except the TRACK program.

7.Proﬁle

•You will also be able to see the proﬁle and where the unit made a change to Heart Rate Access.

NOTE – This is not available on the T240.

Changing Your Target Heart Rate in a Program

The normal Heart Rate Control program allows you to make Target Heart Rate changes at anytime while in a program by pressing the JustGo® /ENTER key. The difference is now that by pressing the JustGo®/ENTER key, it will bring you into Heart Rate Access; by pressing the JustGo® /ENTER key again, you will be asked to make a new Target Heart Rate change.