Keys Fitness T260 Weight Unit Feature, User Identification Feature, Activate User, Create User

Page 10

2.3Weight Unit Feature

The weight unit can be selected to display in pounds or kilograms.

To select a weight unit: Enter into the Settings menu, see Section 2.1.

1.Select the WEIGHT UNIT option, and press the JustGo®/ENTER key to accept.

2.Select the weight unit you wish to be displayed on the screen. Choose from POUNDS or KILOGRAMS. Press the INCREASE or DECREASE keys to select.

3.Press the JustGo®/ENTER key to accept.

From now on, weight values entered will be in the selected units.

2.4 User Identification Feature

The User Identification feature allows the treadmill to recognize individuals and automatically enter their weight along with additional information. The T240 will recognize two and the T260 will recognize four.

Whenever the User Identification feature is used, the weight will be automatically entered at each exercise program. Therefore, user weight will not be asked during the program set up. Also, the user’s age will be automatically entered during the Heart Rate Control program to calculate the maximum heart rate.

The User ID feature gives access to the following options:

•ACTIVATE USER ID

•CREATE USER ID

•VIEW STATISTICS

•EDIT USER ID

•RESET STATISTICS

•DELETE USER ID

Activate User

To activate the User Identification feature: Enter into the Settings menu, see Section 2.1.

1.Select the USER ID option and press the JustGo®/ENTER key to accept.

2.Select the ACTIVATE USER ID option and press JustGo®/ENTER key to accept.

3.Press INCREASE or DECREASE key to choose ON or OFF to activate or deactivate it and then press the JustGo®/ENTER key to accept.

Now that the User ID feature is activated; you will be prompted, at the beginning of each program, to select a User Identification.

Create User

To create a User ID’s:

1.Enter into the Settings menu, see Section 2.1.

2.Select the USER ID option and press the JustGo®/ENTER key to accept.

3.Select the CREATE USER option and press JustGo®/ENTER key to accept.

4.You will immediately be sent to the lowest empty location, if the MEMORY is full you will have to go to the DELETE USER option.

5.A total of six alpha-numeric characters can be used to name the USER ID. Use the INCREASE or DECREASE keys to select any letter from A to Z or number from 0 to 9 as the first character. If you wish to leave a space between characters, simply

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents T240 T260 Contents IMPORTANTImportant SafetySAFETYNoticeNOTICE For Your Personal SafetyElectrical Information Know Your Heart RateT240 T260 Limited Warranty Responsibility of the UserOperatiOperating your Getting to know the T240 T260 Computer display MonitorScanning Feature KeysPausing During an Exercise Saving an Exercise custom programsLanguage Feature Settingtti Up the Computer tto Your EnvironmentAccess to Settings Menu Viewing Exercise ParametersActivate User Weight Unit FeatureUser Identification Feature Create UserView Statistics Reset StatisticsEdit User Delete UserWarm Up and Cool Down Feature Distance Unit FeatureTime, Distance or Calories Feature Table of minimum and maximum valuesHeart Rate Control Options Feature Heart Rate Access Options FeatureBig Number Option Beeper FeatureSpeed Limits Learn Program T260ExercisExercise Programs Heart Rate Recovery T260 onlyProgram Levels Manual Program JustGo ProgramHill Climb Program T260 only Speed Run Program T260 only Track Program T260 onlyHeart Rate Control Program HRC and Weight Loss Program Memory & Learn Programs Cardiovascular ProgramWalk Program How to Use Heart Rate Access Heart Rate Access FeatureChanging Your Target Heart Rate in a Program Usingsi a Heart Rate Receiveri r Access to Diagnostics menu Problem Possible Cause SolutionKeypad Test Nvram TestEprom test Display TestHeart Rate System Test Beeper testBelt Alignment Motor Check Elevation CalibrationStatistics Safety Key testError log Speed sensor testMaintenance Maintenance InformationInfor ationGeneral Care Belt and Running Deck Running Belt Deck SurfaceQuick Troubleshooting Check List Problem Possible CAUSE/SOLUTIONError Codes Thank You for Purchasing a Bodyguard T240 T260International Safety requirements North AmericaInterference limits requirements North America Designed and Engineered in Canada
Top Page Image Contents