NordicTrack NTL11909.0 manual HOW to Fold and Move the Treadmill, HOW to Fold the Treadmill

Page 24

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL

To avoid damaging the treadmill, adjust the incline to the lowest position before you fold the treadmill. Then, remove the key and unplug the power cord.

CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill.

1.Hold the walking platform firmly in the location shown by the arrow below. CAUTION: Do not hold the treadmill by the plastic parts. Make sure to bend your legs and keep your back straight. Raise the walking platform about halfway to the vertical position.

Walking Platform

2.Hold the walking platform firmly with your right hand. Pull the latch knob to the left and hold it. Raise the walking platform until the plate passes the pin on the latch knob. Release the latch knob.

Make sure that the plate is resting against the pin as shown.

Walking

Platform

Latch

Knob

Plate

Pin

To protect the floor or carpet, place a mat under the treadmill. Keep the treadmill out of direct sun- light. Do not leave the treadmill in the storage posi- tion in temperatures above 85° F (30° C).

HOW TO MOVE THE TREADMILL

Before moving the treadmill, fold it as described at the left. CAUTION: Make sure that the plate is resting against the pin. Moving the treadmill may require two people.

1.Hold the uprights and place one foot against a wheel.

Uprights

Wheel

2.Pull back on the uprights until the treadmill will roll on the wheels, and carefully move it to the desired location. CAUTION: Do not move the treadmill without tipping it back and do not move the treadmill over an uneven surface.

3.Place one foot against a wheel, and carefully lower the treadmill.

24

Image 24
Contents QUESTIONS? Model No. NTL11909.0 Serial NoTable of Contents Important Precautions Various factors, including the users movePage Before YOU Begin Assembly Page Pinch the Upright Wire 2 Screws 117. Firmly tighten the threeBolts and the two Screws Three Bolts and the two Screws111 110 Co nsole Assembly Console Page Page Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Diagram Features of the ConsoleConsole AudioHOW to Turn on the Power HOW to USE the Manual ModePage Measure your heart rate if desired. Before using Turn on the fan if desiredHOW to USE a SET-A-GOAL Workout Start the workoutStart the workout See on HOW to USE the Ifit Live Mode Connect your treadmill to your own wireless networkSelect the iFit Live mode HOW to USE the Stereo Sound System HOW to USE the Settings ModeSelect the settings mode Select the wireless network modeExit the settings mode Log in to your iFit Live accountView the unit of measurement HOW to USE the Maintenance Mode Exit the maintenance modeCalibrate the screen View technical informationHOW to Fold and Move the Treadmill HOW to Fold the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useImportant The treadmill is not Compatible with GFCI-equipped outletsProblem The iFit Live mode is not functioning correctly Problem The walking belt slows when walked onTop Problem Solution Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyPart LIST-Model No. NTL11909.0 Qty DescriptionDescription Exploded R0410A Exploded Drawing C-Model No. NTL11909.0 Exploded Drawing D-Model No. NTL11909.0 Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT