NordicTrack NTL11909.0 manual Troubleshooting, Important The treadmill is not

Page 26

TROUBLESHOOTING

Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, see the front cover of this manual.

PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor

is plugged into a properly grounded outlet (see page 12). Use only a single-outlet surge suppres-

sor that meets all of the specifications described on page 12.

IMPORTANT: The treadmill is not

compatible with GFCI-equipped outlets.

 

 

b. After the power cord has been plugged in, make sure that the key is fully inserted into the console.

c. Check the reset/off circuit breaker located on the

c

 

treadmill frame near the power cord. If the switch pro-

 

trudes as shown, the circuit breaker has tripped. To

 

 

reset the circuit breaker, wait for five minutes and

Tripped

Reset

then press the switch to the reset position.

PROBLEM: The power turns off during use

 

 

SOLUTION: a. Check the reset/off circuit breaker (see the drawing above). If the circuit breaker has tripped, wait for five minutes and then press the switch to the reset position.

b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for five minutes, and then plug it back in.

c. Remove the key from the console. Reinsert the key fully into the console. d. If the treadmill still will not run, see the front cover of this manual.

PROBLEM: The console screen remains lit when you remove the key from the console

SOLUTION: a. The console features a display demo mode, designed to be used if the treadmill is displayed in a

store. If the screen remains lit when you remove the key, the demo mode is turned on. To turn off

the demo mode, see step 4 on page 22.

 

 

 

 

PROBLEM: The console does not display speed and distance correctly

 

 

 

SOLUTION: a. Remove the key from the console and unplug the

a

 

 

 

power cord. Next, remove the #8 x 3/4" Hood

6

73

 

Screws (6) from the Motor Hood (73) and pivot the

 

6

Motor Hood off.

 

 

 

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents QUESTIONS? Model No. NTL11909.0 Serial NoTable of Contents Important Precautions Various factors, including the users movePage Before YOU Begin Assembly Page Bolts and the two Screws Pinch the Upright Wire2 Screws 117. Firmly tighten the three Three Bolts and the two Screws111 110 Co nsole Assembly Console Page Page PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Console DiagramFeatures of the Console AudioHOW to Turn on the Power HOW to USE the Manual ModePage Measure your heart rate if desired. Before using Turn on the fan if desiredHOW to USE a SET-A-GOAL Workout Start the workoutStart the workout See on Select the iFit Live mode HOW to USE the Ifit Live ModeConnect your treadmill to your own wireless network Select the settings mode HOW to USE the Stereo Sound SystemHOW to USE the Settings Mode Select the wireless network modeView the unit of measurement Exit the settings modeLog in to your iFit Live account Calibrate the screen HOW to USE the Maintenance ModeExit the maintenance mode View technical informationHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Lower the Treadmill for USE Important The treadmill is not TroubleshootingProblem The power turns off during use Compatible with GFCI-equipped outletsTop Problem The iFit Live mode is not functioning correctlyProblem The walking belt slows when walked on Problem Solution Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart LIST-Model No. NTL11909.0 Qty DescriptionDescription Exploded R0410A Exploded Drawing C-Model No. NTL11909.0 Exploded Drawing D-Model No. NTL11909.0 Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty
Top Page Image Contents