NordicTrack 831.2988 Symptom the Walking Belt is OFF-CENTER When Walked on, Erly tightened

Page 16

4. SYMPTOM: THE WALKING BELT IS OFF-CENTER WHEN WALKED ON

a. If the walking belt has shifted to the left, first remove the key

and UNPLUG THE POWER CORD. Using the included allen wrench, turn the left rear roller adjustment bolt clockwise, and the right bo_t counterctockwise, 1/4 of a turn each. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centered.

b. If the walking belt has shifted to the right, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn the left rear roller adjustment bolt counterclockwise, and the right bolt clockwise, 1/4 of a turn each. Be careful not to over- tighten the walking belt. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centered.

c. If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift the edges of the walking belt 3 to 4 inches off the walking plat- form. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and run the treadmill for a few min- utes. Repeat until the walking belt is properly tightened.

5. SYMPTOM: THE WALKING BELT SLOWS WHEN WALKED ON

a. Use only a UL-Iisted surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in _ength.

b. if the walking belt is overtightened, treadmill performance may decrease and the walking belt may be permanently damaged. Remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts counterclock- wise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift the edges of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is prop-

erly tightened.

Rear Roller Adjustment Bolts

c. If the walking belt still slows when walked on, please contact our Customer Service Department.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Questions? Model No Serial NoCustomer HOT Line Mon.-Fri., 6 a.m.-6 p.m. MST For future referenceTable of Contents Important Precautions Play on or around Treadmill There is one decalBefore You Begin Foot RailsAssembly Treadmill Operation HOW to Plug in the Power CordPerformant Lube TM Walking Belt Diagram of the Console Features of the ConsolePlug in the power cord Select the Manual modeLa Insert the key fully into the console Change the incline of the treadmill if desiredSpeed display INCLINE/DISTANCE displaySTART/ENTER Page HOW to Fold the Treadmill for Storage HOW to Move the TreadmillHOW to Lower the Treadmill for USE Symptom the Power does not Turn on Maintenance and Trouble-shootingSymptom the Power Turns OFF During USE Symptom the Walking Belt Slows When Walked on Symptom the Walking Belt is OFF-CENTER When Walked onErly tightened Properly Symptom the Displays of the Console do not FunctionView Factors in a Sensible Diet Conditioning GuidelinesTarget Heart Rate Zones Warm up before you begin Stretch after your warm-upBenefits of Aerobic Exercise Hea Rate Intensity Qty Description Front RollerOrdering Replacement Parts 6690 Exploded Drawing--Model No Limited Warranty
Top Page Image Contents