NordicTrack 831.2988 Symptom the Displays of the Console do not Function, Properly, View

Page 17

6.SYMPTOM: THE DISPLAYS OF THE CONSOLE DO NOT FUNCTION

a.Remove the screws from the hood. Carefully remove the hood. Locate the Reed Switch (74) and the Magnet (95) on the left side of the Pulley (17). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that there is a 1/8"gap between the Magnet and the Reed Switch. If necessary, loosen the Screw (90) and move the Reed Switch slightly. Retighten the Screw. Re-attach the hood, and run the treadmill for a few min- utes to check for a correct speed reading.

PROPERLY

II

I

__118"--

9o __

Top

View

m

17

Image 17

Contents Model No Serial No Questions?Customer HOT Line Mon.-Fri., 6 a.m.-6 p.m. MST For future referenceTable of Contents Important Precautions Treadmill There is one decal Play on or aroundFoot Rails Before You BeginAssembly Performant Lube TM Walking Belt HOW to Plug in the Power CordTreadmill Operation Features of the Console Diagram of the ConsoleSelect the Manual mode Plug in the power cordLa Insert the key fully into the console Change the incline of the treadmill if desiredINCLINE/DISTANCE display Speed displaySTART/ENTER Page HOW to Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Lower the Treadmill for USE Symptom the Power Turns OFF During USE Maintenance and Trouble-shootingSymptom the Power does not Turn on Erly tightened Symptom the Walking Belt is OFF-CENTER When Walked onSymptom the Walking Belt Slows When Walked on View Symptom the Displays of the Console do not FunctionProperly Target Heart Rate Zones Conditioning GuidelinesFactors in a Sensible Diet Stretch after your warm-up Warm up before you beginBenefits of Aerobic Exercise Hea Rate Intensity Front Roller Qty DescriptionOrdering Replacement Parts 6690 Exploded Drawing--Model No Limited Warranty