Reebok Fitness RBTL11981 manual Problem The walking belt slows when walked on

Page 17

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length.

b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be permanently damaged. Remove the key and UN- PLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts counterclock- wise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

b

3ÓÐ4Ó

Rear Roller Adjustment Bolts

c. If the walking belt still slows when walked on, please call our Customer Service Department, toll-free.

PROBLEM: The walking belt is off-center

SOLUTION: a. If the walking belt has shifted to the left, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn the left rear roller adjustment bolt clockwise, and the right bolt counterclockwise, 1/4 of a turn each. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centered.

b. If the walking belt has shifted to the right, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn the left rear roller adjustment bolt counterclockwise, and the right bolt clockwise, 1/4 of a turn each. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centered.

PROBLEM: The walking belt slips when walked on

SOLUTION: a. If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and carefully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

a

b

a

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Customer HOT Line Model No. RBTL11981 Serial NoTable of Contents Important Precautions There is one decal Right Side Before YOU BeginLeft Side HOW to SET UP the Treadmill Performant Lubetm Walking Belt HOW to Plug in the Power CordTreadmill Operation Features of the Console Diagram of the ConsoleRefer to the drawing at the top Diagram of the Console HOW to Turn on the PowerHOW to USE the Manual Mode DISTANCE/LAPS displayÑThis display shows both the distance HOW to USE the Speed Programs and the Incline ProgramsTime displayÑThis display shows the total Walking belt and remove the keyTo start the program If you selected an incline programFollow your progress with the LED displays Whenkey. you are finished exercising, removeInformation Mode Optional Chest Pulse Sensor HOW to Move the Treadmill HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE Problem The power turns off during use TROUBLE-SHOOTINGProblem The walking belt slips when walked on Problem The walking belt slows when walked onProblem The walking belt is off-center Reebok University Walking and Weight ReductionWalking and Cardiorespiratory Endurance Walking and Reduced Risk for CARDIOVAS- Cular DiseaseReferences Walking and Stress ReductionWalking and Injuries Workout Guidelines Exercise GuidelinesExercise Intensity Suggested Stretches Qty Description Part List Ñmodel NO. RBTL11981HOW to Order Replacement Parts Exploded Drawingñmodel NO. RBTL11981 103 107 109 104 105 101 102 106 108 Limited Warranty
Top Page Image Contents