90T SETTINGS
Use the TIME/WEIGHT UP ARROW key to move forward through settings. Use the TIME/WEIGHT DOWN ARROW key to move backward through these settings. To change a setting, use the SPEED
ARROW key. If display mode is turned off, each setting is identified as a numeral only.
SETTING FACTORY DEFAULT | DESCRIPTION | ||
DISPLAY MODE | “diSP ON” (1)* |
| This setting turns the console’s ability to display messages |
|
|
| on and off while in the Settings mode. |
ENGLISH/METRIC UNITS | “UnitS LbS” (2) |
| The measurement unit type for weight, distance, and speed. |
|
|
| “LbS” represents the ENGLISH system, and “grS” represents |
|
|
| the Metric system. |
MAXIMUM WORKOUT TIME | “tinE 99” (3) |
| This is the maximum allowable duration for a workout. |
|
|
| The range is one to 99 minutes. |
MAXIMUM SPEED | “SPd 10.0” (4) |
| This is the fastest speed at which the treadmill can run. |
|
|
| The range is 0.5 MPH to 10 MPH (0.8 KPH to 16 KPH). |
MAXIMUM INCLINE | “inc. 15.0” (5) |
| This is the maximum percentage to which the incline can be set. |
|
|
| The range 0.0 percent to 15 percent. |
FLYERS ON/OFF | “Fly ON” (6) |
| Flyers are the animated circles that appear in the DATA |
|
|
| DISPLAY when the treadmill is turned on. |
POLAR ON/OFF | “PoLAR ON” (7) | Switching on this feature makes it possible to use the | |
|
|
| Polar heart rate chest strap. |
ACCELERATION RATE | “AccEL = 3” (8) |
| The rate at which the treadmill speeds up to the selected speed, |
|
|
| ranging from 1 (slowest) to 5 (fastest). |
DECELERATION RATE | “dEcEL = 3” (9) |
| The rate at which the treadmill speeds up to the selected speed, |
|
|
| ranging from 1 (slowest) to 5 (fastest). |
WAXER SYSTEM INSTALLED | “Lub SyS = no” (10) |
This setting indicates whether or not a waxer system
has been installed on the treadmill. This setting is changed when the wax bag is replaced on units with the
*If display mode is turned off each setting is identified as a numeral only.
30