Life Fitness 91Ti, 90T operation manual Save These Instructions for Future Reference

Page 7

Keep the area six feet (two meters) by three feet (one meter) behind the treadmill clear of any obstructions, including walls, furniture, and other equipment.

Handrails may be held to enhance stability as needed, but are not for continuous use.

Never mount or dismount the treadmill while the running belt is moving. Use the handrails whenever additional stability is required. In case of an emergency, such as tripping, grasp the handrails, and place the feet on the side platforms.

Never walk or jog backwards on the treadmill.

An immobilized treadmill cannot be operated. The main motor, incline, and waxer are all dis- abled. To immobilize the 91Ti treadmill, set the display to read “SELECT WORKOUT”. Press the STOP key twice to do so if this message does not appear in the MESSAGE CENTER.

Then, hold down the SPEED DOWN key, and press the STOP key. The console for the immo- bilized treadmill displays “IMMOBILIZED” in the MESSAGE CENTER. To restore operation, repeat the step of holding down the SPEED DOWN key and pressing the STOP key. To immo- bilize the 90T model treadmill, hold down the TIME DOWN key, and press the STOP key. The console for the immobilized treadmill shows three horizontal lines in each of the data display windows. To restore normal operation, repeat the step of holding down the TIME DOWN key and pressing the STOP key.

Use this appliance only as it is intended, according to this manual. Do not use attachments not recommended by the manufacturer.

Always wear the emergency stop clip when using the treadmill.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

6

Image 7
Contents 91Ti, 90T Treadmills International Offices Corporate HeadquartersPage Table of Contents 91Ti 90T Getting Started Important Safety InstructionsSave These Instructions for Future Reference Consignes DE Sécurité Importantes Point DE DépartConservez CES Instructions Pour Usage Ultérieur Setup Removing and Replacing the WAX BAG HOW to Position and Stabilize the Life Fitness Treadmill Data Display on a Model 90T treadmill Centering the Belt Fitness Networking and Entertainment 91TI only Display Console Overview Display ConsoleDisplay Console Descriptions Page Emergency Stop System Accessory TraysReading Rack 3HEART Rate Zone Training Exercise WHY Heart Rate Zone Training EXERCISE?Heart Rate Monitoring Polar Telemetry Heart Rate Monitoring Chest Strap Workouts Using the WorkoutsWorkout Overviews To stop a workout before the end of the dura Level Workout Descriptions Random 91TI only FAT Burn 91TI only Entering and Using the MANAGER’S Configuration MANAGER’S Configuration91TI Settings Factory Default Description Configuration Settings90T Settings Preventive Maintenance Tips Service and Technical DataMonthly BI-ANNUALLY Annually Preventive Maintenance ScheduleTroubleshooting the Polar Heart Rate Chest Strap Troubleshooting the Lifepulse System SensorsHOW to Adjust and Tension the Striding Belt Removing the Accessory TraysTracking Centering a Striding Belt Tensioning AN Existing Striding Belt HOW to Obtain Product Service Life Fitness 91TI Treadmill Specifications SpecificationsLife Fitness 90T Treadmill Specifications M051-00K60-A028