5 THE MANAGER’S CONFIGURATION
5.1ENTERING AND USING THE MANAGER’S CONFIGURATION
91Ti model: Press and hold down the PAUSE key, and press the CLEAR key twice. Continue to hold down the PAUSE key until the MESSAGE CENTER displays “SERVICE MENU”. Then, release the PAUSE key, press the QUICK START key. The MESSAGE CENTER displays “MANAGER’S CONFIG”. Press ENTER. The MESSAGE CENTER then displays, in turn, each of the configuration settings. Use the TIME arrow keys to scroll through the list of settings, or allow the MESSAGE CEN- TER to scroll automatically through the options. To stop the automatic scrolling, press the PAUSE key. To resume the automatic scrolling, press the PAUSE key again. To select a displayed option, press the ENTER key.
The Manager’s Configuration settings are listed on the following page in the order in which they appear in the MESSAGE CENTER display. Use the INCLINE or SPEED keys to change set- tings. In most cases, changing a setting means turning it on or off. See the table on the following page for more information.
To return to the workout setup state, press the CLEAR key repeatedly until the MESSAGE CENTER displays the prompt to set up a workout.
90T model: Press and hold down the TIME UP ARROW key, and press the STOP key twice. The DATA DISPLAY windows show “SETTINGS”. Use the TIME ARROW keys to scroll through the displayed list of settings. Use the SPEED ARROW keys to change settings. See the table on the following page for detailed information about settings. To return to workout setup mode, press the STOP key once.
28