Life Fitness 90T, 91Ti operation manual Tracking Centering a Striding Belt

Page 36

TRACKING (CENTERING) A STRIDING BELT

Two people are needed to perform this procedure.

1Locate the two access holes to the belt tensioning bolts on each of the rear roller guards.

2Stand on the sides of the treadmill and straddle the belt, not standing on it. Start a MANUAL workout, and set the belt speed to run at 4.0 mph (6,4 kph).

3If the striding belt has moved to the right, turn the right tension bolt (B) 1/4 turn clockwise with provided ¼" Allen wrench, and then turn the left tension bolt (A) 1/4 turn counter-clock- wise to start striding belt tracking back to center of roller.

If the striding belt has moved to the left, turn the left tension bolt 1/4 turn clockwise and then turn the right tension bolt 1/4 turn counter-clockwise to start striding belt tracking back to center of roller. Repeat adjustments until striding belt appears centered. Allow machine to continue running for several minutes to observe if tracking remains stabilized.

NOTE: Do not exceed one full turn of the adjusting screws in either direction. If after one full turn the belt does not track properly, contact Customer Support Services. The phone num- bers are listed in "How to Obtain Product Service."

NOTE: Do not exceed one full turn of the adjusting screws in either direction. If after one full turn the belt does not track properly, contact Customer Support Services. The phone numbers are listed in Section 6.7, titled How to Obtain Product Service.

A B

35

Image 36
Contents 91Ti, 90T Treadmills Corporate Headquarters International OfficesPage Table of Contents 91Ti 90T Important Safety Instructions Getting StartedSave These Instructions for Future Reference Point DE Départ Consignes DE Sécurité ImportantesConservez CES Instructions Pour Usage Ultérieur Setup Removing and Replacing the WAX BAG HOW to Position and Stabilize the Life Fitness Treadmill Data Display on a Model 90T treadmill Centering the Belt Fitness Networking and Entertainment 91TI only Display Console Display Console OverviewDisplay Console Descriptions Page Accessory Trays Emergency Stop SystemReading Rack WHY Heart Rate Zone Training EXERCISE? 3HEART Rate Zone Training ExerciseHeart Rate Monitoring Polar Telemetry Heart Rate Monitoring Chest Strap Using the Workouts WorkoutsWorkout Overviews To stop a workout before the end of the dura Level Workout Descriptions Random 91TI only FAT Burn 91TI only MANAGER’S Configuration Entering and Using the MANAGER’S ConfigurationConfiguration Settings 91TI Settings Factory Default Description90T Settings Service and Technical Data Preventive Maintenance TipsPreventive Maintenance Schedule Monthly BI-ANNUALLY AnnuallyTroubleshooting the Lifepulse System Sensors Troubleshooting the Polar Heart Rate Chest StrapRemoving the Accessory Trays HOW to Adjust and Tension the Striding BeltTracking Centering a Striding Belt Tensioning AN Existing Striding Belt HOW to Obtain Product Service Specifications Life Fitness 91TI Treadmill SpecificationsLife Fitness 90T Treadmill Specifications M051-00K60-A028