POWER SWITCH
Located on the front panel at the base of the treadmill, the ON/OFF switch has two positions: "I" (one) for ON and "0" (zero) for OFF.
IMMOBILIZING THE TREADMILL
An immobilized treadmill cannot be operated. The main motor, incline, and waxer are all disabled. To immobilize the 91Ti treadmill, set the display to read “SELECT WORKOUT”. Press the STOP key twice to do so if this message does not appear in the MESSAGE CENTER. Then, hold down the SPEED DOWN key, and press the STOP key. The console for the immobilized treadmill dis- plays “IMMOBILIZED” in the MESSAGE CENTER. To restore operation, repeat the step of holding down the SPEED DOWN key and pressing the STOP key. To immobilize the 90T model treadmill, hold down the TIME DOWN key, and press the STOP key. The console for the immobilized tread- mill shows three horizontal lines in each of the data display windows. To restore normal operation, repeat the step of holding down the TIME DOWN key and pressing the STOP key.
The DATA DISPLAY on a Model 90T treadmill
12