M1036 Micro Mill
SET UP
Inventory
The following is a description of the main components shipped with the SHOP FOX® Model M1036. Lay the components out to inventory them.
Box 1 Contents (Figure 3) | Qty | |
A. | Headstock | 1 |
B. | Collar | 1 |
C. | Spacer | 1 |
D. | Base with Column | 1 |
E. | Downfeed Lever Handle | 1 |
F. | Column Lock Knob | 1 |
G. | Fence | 1 |
Box 1 Tools and Hardware (Not Shown) | Qty | |
• | Phillips Head Screwdriver | 1 |
• | Hex Wrenches 2, 2.5, 3, 4mm | 1 Each |
• | Open End Wrench 5.5/7mm | 1 |
• | Chuck Removal Wedge | 1 |
• | Round Belt | 1 |
• | Cap Screw | 1 |
• | Square Nut | 1 |
Box 2 Contents (Figure 4) | Qty | |
H. | Compound Slide Table | 1 |
I. | Handwheel Handles | 2 |
Box 2 Hardware (Not Shown) | Qty | |
• | 4 | |
• | 4 | |
• | Hex Nuts | 2 |
• | Flat Washers 6mm | 2 |
If any parts appear to be missing, examine the packag- ing carefully to be sure those parts are not among the packing materials. If any parts are missing, find the part number in the back of this manual and contact Woodstock International, Inc. at (360)
A
D | G | B | E |
| |||
|
| ||
|
| C | F |
|
|
|
Figure 3. Box 1 contents.
H
I
Figure 4. Box 2 contents.
NOTICE
When ordering replacement parts, refer to the parts list and diagram in the back of the manual.