Cybex 445T Treadmill Owner’s Manual
9.Press the Speed + — keys to change the belt speed at any time. The right display will show the set speed.
10.Press the Incline 
keys to change the incline at any time. The left display will show the current incline only when incline keys are used, then revert to time.
manual
programs
HR
control
Cybex International, Inc. Medway, MA USA (508) | Wireless HR Receiver Inside |
CHANNEL | VOLUME |
Figure 1
11.Press the Pause/Stop key at any time to stop your workout. Press Pause/Stop once to end your workout and begin your Workout Review. As you press Pause/Stop once, the treadmill belt will stop. Press Pause/Stop a second time to clear the Workout Review, return to Dormant Mode and return incline to 0%.
12.If the
immediately, causing the belt to stop. The right window changes to “OFF” and the left window shows a flashing pattern of “o” and “o”. Replacement of the
13.When you complete a program the treadmill begins a countdown, “3...2...1,” and sounds a tone for each count. The belt slows to a stop and Workout Review displays in the center window for the preset time or until you press the Pause/Stop key.
14.The treadmill returns to Dormant Mode and the incline returns to 0%
Stopping the Treadmill
Press Pause/Stop once to pause your workout for up to 20 seconds (or time set for idle) and to enter the Workout Review. The belt will stop and workout data will remain in memory for the duration of pause. Press the Quick Start key within 20 seconds to continue your workout and add to the time you already accumulated. If the Quick Start key has not been pressed during the duration of pause, workout data will be cleared and the display will change to Dormant Mode.