
Cybex 445T Treadmill Owner’s Manual
NOTE: If installing the A/V option, refer to the 445T A/V bracket installation instructions (supplied with the A/V bracket).
8.Install the console assembly to the console back.
A.Locate the console assembly (#2), two screws, 
B.Place the console assembly (#2) in position on the console back (#4). See Figure 7.
| #2 | 
| #4 | 
Figure 7
C.Connect these cables into the display board: the display cable (2 connectors), the contact heart rate cable and the ground wire. See Figure 8.
| Display | 
| Cable | 
| (2 Connectors) | 
| Ground | 
| Wire | 
| Contact | 
| Heart Rate | 
| Cable | 
| Figure 8 | Setup | 
| 
 | |
| 
 | and | 
| 
 | Assembly | 
| 
 | Page  |