Cybex International CX-445T manual Install the console back to the upright assembly

Cybex 445T Treadmill Owner’s Manual

7.Install the console back to the upright assembly.

A.Locate the console back (#4) and twelve screws, 8-32 x .38” (#13).

B.Place the console back (#4) in the correct position on the upright assembly (#3). See Figure 5.

#13

#4

#13

#3

Figure 5

C.Using a Philips head screwdriver install two screws 8-32 x .38” (#13) to hold the console back (#4) in place. Do not fully tighten at this time. See Figure 5.

D.Using a Philips head screwdriver secure the console back (#4) to the upright assembly (#3) using ten screws 8-32 x .38” (#13). Fully tighten the two screws installed in step 7C. See Figure 6.

#4
#3	#13

Figure 6

Setup and Assembly Page 5-6