11. Hold the handrail assembly near the console as- | 11 |
|
|
| |
sembly. Connect the wire harness extending |
|
|
| ||
from the console assembly to the wire harness |
|
|
|
| |
extending from the handrail assembly. See the | Console |
|
|
| |
inset drawing in step 7. The connectors |
|
|
| ||
should slide together easily and snap into | Assembly |
| Wire |
| |
place. | If they do not, turn one connector and try |
|
|
| |
again. | IF THE CONNECTORS ARE NOT CON- |
| Harnesses |
| |
NECTED PROPERLY, THE CONSOLE MAY |
|
|
| Slot | |
BE DAMAGED WHEN THE POWER IS | 69 |
|
| ||
TURNED ON. |
|
|
| ||
Set the Handrail Bracket (70) into the slot on the |
|
|
|
| |
console assembly as you slide the ends of the | Bracket |
| 70 |
| |
Handrails (69, 71) onto the brackets on the |
|
| |||
Uprights (77, 78). Be careful not to pinch any | 77 |
| Handrail |
| |
wires. |
|
| Assembly | 78 | |
|
|
|
| 71 | |
|
|
|
|
| Bracket |
12. Start two 1/4" x 1 1/2" Bolts (3) with 1/4" | 12 |
|
|
| |
Washers (31) and 1/4" Star Washers (11) into |
|
|
| ||
the Console Frame (92) and Handrail Bracket |
|
|
|
| |
(not shown). Do not fully tighten the Bolts yet. |
|
|
|
| |
Start four 1/4" x 1/2" Bolts (6) with four 1/4" Star |
| 11 |
| 69 | |
Washers (11) into the lower end of the Handrails |
|
| |||
(69, 71). | 31 |
| 31 |
| |
Press the lower end of the Handrails (69, 71) |
|
| |||
against the Uprights (77, 78) as you tighten the | 78 |
| 92 |
| |
four 1/4" x 1/2" Bolts (6). Tighten the 1/4" x 1 | 3 |
| |||
1/2" Bolts (3). | 11 71 | 77 | 11 | ||
|
|
|
| ||
|
| 6 |
|
| 6 |
11