6. | See the left inset drawing. Identify the outer |
| side of the remaining Frame Spacer (79). |
| Hold the Frame Spacer (79) between the Left |
| Upright (77) and the Lift Frame (65), with the |
| outer side of the Frame Spacer facing the |
| Left Upright. Attach the Left Upright to the Lift |
| Frame with a 3/8" x 2 1/2" Bolt (1), a 3/8" |
| Washer (10), and a 3/8" Nut (13); do not |
| tighten the Bolt yet. |
7. Have a second person hold the console assem- | |
| bly near the Right Upright (78). |
| Connect the wire harness on the console as- |
| sembly to the Upright Wire (74) as shown in the |
| inset drawing. The connectors should slide to- |
| gether easily and snap into place. If they do |
| not, turn one connector and try again. IF THE |
| CONNECTORS ARE NOT CONNECTED |
| PROPERLY, THE CONSOLE MAY BE DAM- |
| AGED WHEN THE POWER IS TURNED ON. |
6 | 77 |
|
|
| 13 |
|
|
| 79 |
|
|
1 | 10 |
|
|
| 65 |
|
|
79 | Outer | 77 | 13 |
|
| ||
| Side | 10 |
|
| 1 |
| |
| Inner |
| 79 |
| Side |
| 65 |
|
|
| |
7 | Console Assembly |
|
Remove the wire tie from the Upright Wire (74). |
Wire
Harness
74
78 | Wire |
Tie |
74
9