Gold's Gym GGTL39608.0 manual Assembly

Page 6

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly re- quires two persons. Set the treadmill in a cleared area and remove the packing materials; do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or to the shipping carton. This is normal and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe it off with a soft cloth and mild, non-abrasive cleaner.

Assembly requires the included hex keys

and your own Phillips screwdriver

, rubber

.

mallet

, adjustable wrench

, wire cutters

, and needlenose pliers

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assem- bly. Extra hardware may be included.

1/4" x 1/2"

5/16" x 3/4"

Bolt (6)–4

Bolt (2)–4

1/4" Star

5/16" Star

3/8" Star

3/8" Washer

Washer (11)–6

Washer (5)–4

Washer (9)–4

 

 

 

(10)–2

1/4" x 1 1/2" Bolt (3)–6

3/8" x 2 1/4" Bolt (8)–6

3/8" x 2 1/2" Bolt (1)–2

1/4" Nut (4)–4

3/8" Nut (13)–4

1/4" Washer

 

(31)–2

#8 x 3/4"

#8 x 1/2" Screw

Wheel Spacer

Screw (7)–6

(12)–1

 

 

(83)–4

6

Image 6
Contents QUESTIONS? Model No. GGTL39608.0 Serial NoTable of Contents Important Precautions Page Before YOU Begin Assembly Tighten the Bolts yet Not overtighten the Bolts the Wheels should Turn freelyDoes not fall into the Right Upright See the far right drawing. Wrap the wire tieMake sure that the end of the Upright Wire See the left inset drawing. Identify the twoConnectors are not Connected Aged When the Power is Turned onPROPERLY, the Console MAY be DAM Ful not to pinch any wires Start all four Bolts before firmly tightening ThemIf the Connectors are not CON Be Damaged When the Power is Turned onNected PROPERLY, the Console MAY Side View View from Above Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleInsert the key into the console HOW to Turn on the PowerHOW to USE the Manual Mode Start the walking beltMeasure your heart rate if desired. Before using HOW to USE a Preset Workout Information Mode HOW to USE the DumbbellsHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useCompatible with GFCI-equipped outlets Top View Problem The walking belt slows when walked onKey and Unplug the Power CORD. Using Walking belt has shifted to the right, turn the leftWorkout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart LIST-Model No. GGTL39608.0 Key No. Qty DescriptionExploded Drawing Exploded Drawing B-Model No. GGTL39608.0 R0310A Exploded Drawing C-Model No. GGTL39608.0 R0310A Exploded Drawing D-Model No. GGTL39608.0 R0310A Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT