Healthrider HRTL16992 manual TROUBLE-SHOOTING and Maintenance, Problemsolution

Page 25

TROUBLE-SHOOTING AND MAINTENANCE

Most treadmill problems can be solved by following the instructions below. If further assistance is needed, please call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).

PROBLEMSOLUTION

1.The power does not turn on

a.Make sure that the power cord is plugged into a surge protector, and that the surge protector is plugged into a properly grounded outlet. (See page 7.) Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length.

b.Make sure that the key is fully inserted into the console.

c.Check the circuit breaker located on the frame near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch back in.

d.Check the on/off switch located on the frame near the power cord. The switch must be in the on posi- tion.

Tripped Reset

On

Position

2.The power turns off during use

a.Check the circuit breaker located on the treadmill frame near the power cord (see 1. c. above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in.

b.Make sure that the power cord is plugged in.

c.Remove the key from the console and then reinsert it.

d.Make sure that the on/off switch is in the on position (see 1. d. above).

3. The walking belt

a. Make sure that only an appropriate surge protector is used (see 1. a. above).

slows when walked

 

 

on

b. If the walking belt is overtightened, tread-

b

 

mill performance may decrease and the

 

 

 

walking belt may be permanently dam-

3Ð4Ó

 

aged. Remove the key and UNPLUG THE

 

 

POWER CORD. Using the included allen

 

 

wrench, turn both rear roller adjustment

 

 

bolts counterclockwise 1/4 of a turn. When

 

 

the walking belt is properly tightened, you

 

 

should be able to lift the edges of the

Rear Roller Adjustment Bolts

 

walking belt 3 to 4 inches off the walking

 

 

platform. Be careful to keep the walking

 

 

belt centered. Plug in the power cord, insert the key and run the treadmill for a few

 

minutes. Repeat until the walking belt is properly tightened.

25

Image 25
Contents Model No. HRTL16992 Serial No QUESTIONS?Customer HOT Line Important Precautions Table of ContentsPage Right Side Before YOU BeginBack Assembly HOW to PUT on the Chest Pulse Sensor HOW to USE the Chest Pulse SensorChest Pulse Sensor Care and Maintenance Chest Pulse Sensor TROUBLE-SHOOTINGHOW to Plug in the Power Cord Operation and AdjustmentPerformant Lubetm Walking Belt Diagram of the Console Features of the Console Description of the Console HOW to USE the Manual Mode HOW to Turn on the PowerSelect the manual mode Adjust the incline of the treadmill as desiredDistance/Incline Follow your progress With the LED track Five displaysUse the handgrip pulse sensor, if desired Walking belt and remove the keySelect one of the six preset programs HOW to USE the Preset ProgramsTo start the program HOW to USE the Pulse Programs Enter a maximum heart rate setting Desired speed and incline settings HOW to Create Custom ProgramsSelect one of the two custom programs To start the walking beltHOW to USE Custom Programs HOW to Connect Your Portable Stereo HOW to Connect Your Computer HOW to Connect Your Home StereoPressVCR. the Play button on your CD player or HOW to Connect Your VCRWhenkey. the program is completed, remove Go to your computer and start an internet HOW to USE Programs Directly from OUR Internet SiteConnection Start your web browser, if necessary ProgramImportant The Calories display should be blank. If Information MODE/DEMO ModeHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problemsolution TROUBLE-SHOOTING and MaintenanceDisplays Magnet and the Reed Switch is aboutTop Make sure that the gap between Bubbles form in the walking beltChest pulse sen- sor does not function properly Exercise Intensity Conditioning GuidelinesWorkout Guidelines Suggested Stretches Key Qty Description Part LISTÑModel No. HRTL16992HOW to Order Replacement Parts Exploded DRAWINGÑModel No HRTL16992 Limited Warranty

HRTL16992 specifications

The Healthrider HRTL16992 is an advanced elliptical trainer designed to provide an efficient and enjoyable workout experience. This machine is ideal for users looking to engage in low-impact cardiovascular exercise while targeting various muscle groups. With a combination of innovative features, cutting-edge technology, and user-friendly design, the HRTL16992 offers a comprehensive fitness solution for individuals of all fitness levels.

One of the standout features of the Healthrider HRTL16992 is its adjustable incline ramp, which allows users to customize their workout intensity. By altering the incline, users can activate different muscle groups, resulting in a more dynamic and effective workout. This versatility accommodates a wide range of fitness goals, from weight loss to muscle toning.

The elliptical trainer is equipped with a smooth, quiet flywheel that promotes a natural stride motion, mimicking the biomechanics of walking or running without the harsh impact on joints. This feature makes it an excellent option for people with joint concerns or those recovering from injuries. Additionally, the adjustable stride length enhances comfort and allows users to find their optimal training position.

To keep workouts engaging, the HRTL16992 includes a variety of built-in workout programs. These pre-set routines cater to different fitness levels and objectives, making it easier for users to stick to their exercise plans. The console features a large display that provides real-time feedback on key workout metrics, including time, speed, distance, calories burned, and heart rate. These metrics are crucial for tracking progress and staying motivated.

In terms of technology, the Healthrider HRTL16992 features integrated Bluetooth connectivity, allowing users to sync their fitness data with mobile applications and track their progress over time. This connectivity also enables access to fitness programs and virtual workouts, providing a more interactive experience.

Moreover, the trainer comes with multi-grip handlebars that offer different hold positions, enabling users to engage their upper body and enhance calorie burn. The built-in heart rate monitor ensures that users can stay within their target heart rate zones, optimizing their workout efficiency.

Overall, the Healthrider HRTL16992 is a robust fitness machine designed with user comfort and versatility in mind. Its combination of incline adjustments, workout programs, and technological features makes it a valuable addition to any home gym, catering to the fitness needs of a diverse user base. With the HRTL16992, users can enjoy a comprehensive workout experience that promotes health, wellness, and physical fitness.