CABLE ASSEMBLY
19.Assembly steps 19 through 21 show how to complete the assembly of several pre- attached parts.
The 5/8” x 9/16” Spacer (73) has been pre- attached on the outside of the 3 1/2” Low Pulley (92) for shipping purposes. Remove the 3/8” Nylon Locknut (21), the Spacer, and the Pulley from the 3/8” x 3 3/4” Bolt (71). Do not remove the Bolt. The Bolt has been shown removed for part identification.
Reattach the 3 1/2” Low Pulley (92), with the 5/8” x 9/16” Spacer (73) between the Pulley and the Press Frame (17). Do not tighten the 3/8” Nylon Locknut (21) yet. Be sure that the 3/8” x 3 3/4” Bolt (71), the 3/8” Flat Washer (9), the 5/8” x 9/16” Spacer (73), the 3 1/2” Low Pulley, and the 3/8” Nylon Locknut (21) are oriented as shown.
20.The indicated 3/8” x 3 3/4” Bolt (71) has been inserted from the wrong side for shipping pur- poses. Remove the Bolt and the 3/8” Nylon Locknut (21).
Slide the Cable Trap (66) and the 3 1/2” Pulley (15) onto the 3/8” x 3 3/4” Bolt (71).
21.The indicated 3/8” x 3 3/4” Bolt (71) has also been inserted from the wrong side for ship- ping purposes. Remove the Bolt and the 3/8” Nylon Locknut (21).
Slide the Cable Trap (66) and the 3 1/2” Pulley (15) onto the 3/8” x 3 3/4” Bolt (71).
19
9 | 71 |
73
17 | 92 |
21
20
42 |
|
|
|
| 71 | ||
66 |
| ||||||
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9
21 | 15 |
21 |
| 71 |
42 | 66 | |
9 |
| 15 |
21 |
| |
|
|
11