Sears 831.159460 user manual

Page 23

5/8" x 9/16" Spacer (73)–1	1/2" x 1/2" Bushing (87)–1	1/2" x 3/4" Spacer (61)–2

1/2" x 3/8" Spacer (91)–1

1" x 7/8" Plastic Bushing (75)–2

1" Square Inner Cap (65)–1

1 3/4" Square Inner Cap (44)–6

1 1/2" Square Inner Cap (32)–5

2" Square Inner Cap (27)–2

2" Square Outer Cap (51)–2

Image 23

Contents Patent Pending Model No Serial NoFull 90 DAY Warranty Table of ContentsImportant Precautions Before YOU Begin Assembled DimensionsDo not tighten the Nylon Locknuts yet AssemblyFrame Assembly Following Tools not Included are Required for AssemblyTighten all Nylon Locknuts used in steps 1 through Carriage Bolt. Do not tighten the NylonLocknuts yet Side Bushings should fit on each endIndicated tube in the Base. Be sure that 3 1/2 Pulleys 15 are on the indicatedARM Assembly Long Cable Trap is positioned to hold the Cable in place Cable AssemblyCable Assembly Cable Assembly From other side Inset shows viewMust be turned so the thickest end is at Bottom Cable Assembly Seat AssemblyPress a 1 1/2 Square Inner Cap 32 into Square Inner Caps may come pre-assem- bled Cable 35 and the Curl Bar 86 as shownVKR Assembly Page Changing the Weight Setting AdjustmentAttaching and Removing the Curl Frame Using the Curl BARAttaching and Removing the Seat Attaching the LEG Lever to the LOW Pulley Station Weight Resistance Chart Adjusting the Short CableTightening the Cables TROUBLE-SHOOTING and MaintenanceMedium Cable Short Cable Cable DiagramLong Cable TOP ViewPage Page Page Key Part Qty Description R0696AExploded DRAWING-Model No SEARS, Roebuck and CO., Hoffman ESTATES, IL Model No