NordicTrack NTL19007.1 user manual HOW to Connect AN External Source Using a Catv Cable

Page 10

Before operating the television, you must connect a 75 ohm CATV cable to the 75 ohm terminal on the treadmill, a VCR or DVD player to the audio/video input jacks, or a personal audio/video player to the audio/video jack below the television on the console. Note: Use a CATV cable to connect to an external source such as a cable box, satellite TV box, VCR, or analog cable. No CATV cable is included.

HOW TO CONNECT A 75 OHM CATV CABLE

HOW TO CONNECT A DVD PLAYER OR VCR USING THE AUDIO/VIDEO INPUT JACK

1.Connect a 75 ohm CATV cable to the 75 ohm terminal on the treadmill frame near the power cord.

75 Ohm CATV Cable

75 Ohm Terminal

1. Connect the three-
pronged end of the in-	115
cluded Audio/Video
Wire Harness (115) to
your DVD player or
VCR.

HOW TO CONNECT AN EXTERNAL SOURCE USING A CATV CABLE

1.Connect one end of a 75 ohm CATV cable to the 75 ohm output jack on your VCR.

2.Plug in the power cord of your VCR. See your VCR user’s manual for proper grounding instructions.

3.Connect the 75 ohm CATV cable to the 75 ohm ter- minal on the treadmill frame near the power cord.

2.Plug in the power cord of your DVD player or VCR. See your DVD player or VCR user’s manual for proper grounding instructions.

3.Connect the Audio/Video Wire Harness to the audio/video input jack on the treadmill frame near the power cord.

HOW TO CONNECT A PERSONAL AUDIO/VIDEO PLAYER DIRECTLY TO THE CONSOLE

Locate the audio/video jack below the television on the console, and plug it into a jack on your MP3 player, CD player, or personal video player.

10

Image 10

Contents Model No. NTL19007.1 Serial No QUESTIONS?Call TOLL-FREE Table of Contents Important Precautions Power Lines Service Before YOU Begin Assembly Make sure that the power cord is unpluggedNot tighten the Upright Bolts yet Ful not to pinch the Upright Wire HarnessTighten the Upright Bolts yet Wires are pinched Page HOW to Connect AN External Source Using a Catv Cable Chest Pulse Sensor Care and Maintenance HOW to USE the Chest Pulse SensorHOW to PUT on the Chest Pulse Sensor Chest Pulse Sensor TroubleshootingHOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeMeasure your heart rate if desired Select a display mode and follow your progressWith the exercise information on the screen Turn on the fan if desiredSelect an event training workout HOW to USE AN Event Training WorkoutPress the Start button to start the workout Select a preset workout HOW to USE a Preset WorkoutEnter your weight HOW to Create a Custom Workout Select one of the four custom workoutsHOW to USE a Custom Workout HOW to USE AN Ifit Card Insert an iFIT card and select a workoutHOW to USE a Heart Rate Workout Select one of the four heart rate workoutsHOW to Operate the Personal Television Press the Volume buttons to adjust the volumeInformation Mode Press the TV button again and add or delete channelsHOW to USE the Stereo Sound System HOW to Adjust the Cushioning SystemHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Problem Television reception is poor Problem The chest pulse sensor does not function properlyWorkout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyR1207A Qty DescriptionQty Description Exploded Drawing Model NoExploded DRAWING-Model No. NTL19007.1 Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT