HOW TO USE AN EVENT TRAINING WORKOUT
1.Insert the key into the console.
See HOW TO TURN ON THE POWER on page 14.
2.Select an event training workout.
To select an event training workout, press the Event Training button repeatedly; the name of the workout (5 kilometer, 10 kilometer, Half Marathon, or Full Marathon) and a track will appear on the screen.
3.Press the Start button to start the workout.
A moment after you press the button, the walking belt will begin to move at 4 mph. Hold the handrails and begin walking.
After several minutes, the speed setting will flash on the screen and a series of tones will sound. The speed of the walking belt will then increase to 5 mph.
After another minute, the speed setting will flash on the screen and a series of tones will sound. The speed of the walking belt will then increase to 6.5 mph.
Note: To change the speed of the walking belt or the incline of the treadmill at any time during the workout, press the Speed or Incline buttons.
During an event training workout, the screen will show the number of miles or kilometers still to be walked or run.
To stop the workout at any time, press the Stop button. To restart the workout, press the Start but- ton. The walking belt will begin to move at 1 mph. Adjust the speed of the walking belt as desired by pressing the Speed increase or decrease button or one of the numbered speed buttons.
Note: When you have completed an event, your total time and the words “Cool Down” will appear on the screen. If the speed of the walking belt was greater than 5 mph when you completed the event, the walking belt will then slow to 5 mph for one minute. After one minute, the walking belt will slow to 4 mph for 2 minutes. The walking belt will then slow to 3 mph for 2 minutes. The walking belt will then slow to a stop.
4.Select a display mode and follow your progress with the exercise information on the screen.
See step 5 on page 15.
5.Measure your heart rate if desired. See step 6 on page 15.
6.Turn on the fan if desired. See step 7 on page 15.
7.When you are finished exercising, remove the key from the console.
See step 8 on page 15.
16