Ful not to pinch the Upright Wire Harness

2. Identify the Left Upright (73) and the Right	2
Upright (74). See the inset drawing. Tie the wire	2
Upright (74). See the inset drawing. Tie the wire
tie in the Right Upright securely around the end
of the Upright Wire Harness (75). With the help
of a second person, hold the Right Upright near	97	74
the Right Base Cover (77). Then, pull the other	49	74	75
end of the tie up through the rectangular hole in	49		Tie
end of the tie up through the rectangular hole in
the bottom of the Right Upright until the Upright
the bottom of the Right Upright until the Upright
Wire Harness is routed completely through the	73	Tie
Right Upright.	73	Tie
Right Upright.
		75
Gently pull up on the Upright Wire Harness (75)
as you set the Right Upright (74) on the Base
(83) inside the Right Base Cover (77). Be care-
ful not to pinch the Upright Wire Harness.			74
			74
Attach the Right Upright (74) to the Base (83)	76
with two Upright Bolts (72) and two Upright Star
Washers (90). Note: It may be necessary to tip			77
the tops of the Uprights forward slightly as you			77
the tops of the Uprights forward slightly as you
thread the Upright Bolts into the Uprights. Do			83
not tighten the Upright Bolts yet.			83
not tighten the Upright Bolts yet.
Hold Left Upright (73) near the Left Base Cover
(76). Pull the TV Cable (49) and the AV Wire			90
(97) up through the rectangular hole in the bot-			90
(97) up through the rectangular hole in the bot-
tom of the Left Upright and out of the top of the			72
Left Upright. Set the Left Upright on the Base			72
Left Upright. Set the Left Upright on the Base
(83) inside the Left Base Cover. Attach the Left
Upright to the Base with two Upright Bolts and
two Upright Star Washers (not shown). Do not
tighten the Upright Bolts yet.
With the help of a second person, lower the
treadmill off the cardboard stand.

3. Identify the Right Upright Sleeve (96) and the	3
Left Upright Sleeve (95); the Upright Sleeves	3
Left Upright Sleeve (95); the Upright Sleeves
are labeled. Slide the Right Upright Sleeve onto
the Right Upright (74) and the Left Upright	73	95
Sleeve onto the Left Upright (73).	73
Sleeve onto the Left Upright (73).
		“Left”	“Right”
			“Right”
			96
			74
	7

ful not to pinch the Upright Wire Harness.

not tighten the Upright Bolts yet.

tighten the Upright Bolts yet.