MAINTENANCE AND TROUBLESHOOTING
Inspect and properly tighten all parts of the elliptical exerciser regularly. Replace any worn parts immedi- ately.
For smooth
operation of theWheels elliptical exer-
ciser, inspect and clean the
incline ramp
regularly usingRamp a soft cloth and
mild detergent. Other parts of
the elliptical exerciser can
also be cleaned in this way. Keep liquids off the console. Never use abrasives or solvents.
HOW TO CALIBRATE THE INCLINE SYSTEM
If the elliptical exerciser's incline system is not working properly, activate the calibration process by following the steps below.
Hold down the + button and the Program Select button at the same time for about five seconds. Note: Numbers may appear in the left and right displays. Disregard these numbers.
2.Press the Program Select button again. Note: A combination of letters and numbers may appear in the displays.
3.Press the 30° Ramp button. The ramp will move all of the way up and then all of the way down.
HOW TO LEVEL THE ELLIPTICAL EXERCISER
If the elliptical exerciser rocks
during use, turn one or both of
the leveling feet under the rear
stabilizer until
the rocking motion is elimi-
nated.
4.Press the Program Select button three times. The console will then be in the normal operating mode and the elliptical exerciser will be ready for use.
22