ParaBody 425103 manual 83 3/8

FLOATING
PULLEY
	83 3/8 X
	1-1/4”
	101
15	91
	92
1
101
FIGURE 41

STEP 41

•To assemble the LEG CABLE (101) follow the cable routing as shown and use the following steps:

•SECURELY attach the LEG CABLE (101) to the LEG CURL/EXT (15) using one 3/8 X 1-1/4” BOLT (83), one 3/8” WASHER (91), and one 3/8” LOCK NUT (92). See FIGURE 41.

•Route the LEG CABLE (101) around the pulleys in the BASE (1) and through the floating pulley as shown in FIGURE 41.

			FIGURE 42		STEP 42
					• Run the LEG CABLE (101) through
					the hole of the D-RING (7) and attach
					one KEYHOLE CLEVIS (66) to the
					end of the LEG CABLE (101). See
					FIGURE 42.
101
				66
				101
		LAT CABLE
		PRESS CABLE		7
1/2	1/2	1/2	3	1/2	1/2	1/2
0	1	2		4	5	6
			35