Life Fitness SM42 manual Configuration for 6 bolts

SM42 Unpacking & Assembly Instructions

4.Mount the 56” lat top (part T from HARDWARE section) to the 4-stack cell using a 5/8” socket and combination wrench. Insert two of the large 7/16” by 6” bolts using the hardware configuration shown in Figure 7. Mount the 29” tricep top (part U in HARDWARE section) to the frame and connecting beam (See Figure 7).

Figure 7. Configuration for 6” bolts.

150lb. weight stack

300 lb.

weight stack

150 lb. weight stack

Figure 8. Mount the weight stacks.

5.Mount the weight stacks to the 4-stack cell. To do this:

A.Remove the tricep back rest bolts using a 9/16” socket and combination wrench (see Figure 9).

B.Unbolt the top plate and remove the guide rods using a 9/16” socket and combination wrench (see Figure 9).

7