Life Fitness SM50 manual Use a pinch bar to align the seat frame holes to the cubes

Page 10

SM50 Unpacking & Assembly Instructions

7.Mount the seated row and lat bench to the frame. Using the bolts specified in Figure 12 and a 9/16” socket and combination wrenches, mount the benches as shown in Figures 13 and 14.

Use a pinch bar to align the seat frame holes to the cubes

3/8 x 2-3/4”

Figure 13. Mount the benches to the frame.

Figure 14. Bolt the benches to the frame.

10

Image 10

Contents M051-K50-B115 Materials and Tools Required for Assembly Assembly TimeParts box contents UnpackingAssembly SM50 main components seats and cables removed for claritySet the weight stack cells Configuration for 2-3/4 and 3 bolts Configuration for 6 bolts Putting on the weight stacks SM50 Unpacking & Assembly Instructions Use a pinch bar to align the seat frame holes to the cubes SM50 Unpacking & Assembly Instructions Installing the Cables Removing the pulley boltsCrossover Cable Routing Crossover cable routingLOW ROW Cable Routing Low row cable routingScrew the cable into the weight stack LAT Pulldown Cable RoutingTricep Pushdown Cable Routing Tricep pushdown cable routingHardware . Assembly Parts HardwareSM50 Unpacking & Assembly Instructions Hardware . Cable jam nut Hardware . CablesHardware . Top assemblies Hardware . Weight stack rubber bumpers Hardware . Floating pulleysParts List Pulley hardware InstalledHardware installed Floating pulley