SM50 Unpacking & Assembly Instructions
Figure 5. Configuration for 2-3/4” and 3” bolts.
3.Bolt on the connecting beam (part 4 from Figure 2) using a 5/8” socket with extension and combination wrench, to the cells using two of the large 7/16” x 6” bolts, 7/16” washers, and 7/16” nuts, end cap washers and end caps. Figure 6 shows the connected cells.
7/16” x 6” (6)- mount on tops
Remove pulleys from housings to give clearance to socket extension
3/8” x 3” (2)- bolt top beams together
Figure 6. Bolt on the connecting beam, lat top, and tricep top.
6