Image IMBE53910 user manual Assembly, Make Things Easier for Yourself, Locknuts yet

Page 6

ASSEMBLY

Make Things Easier for Yourself

Everything in this manual is designed to ensure that the weight bench can be assembled suc- cessfully by anyone. However, it is important to realize that the versatile weight bench has many parts and that the assembly process will take time. Most people find that by setting aside plen- ty of time, assembly will go smoothly.

Before beginning assembly, carefully read the following information and instructions:

•Assembly requires two people.

•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

•Tighten all parts as you assemble them, unless instructed to do otherwise.

•As you assemble the weight bench, make sure all parts are oriented as shown in the drawings.

•For help identifying small parts, use the PART IDENTIFICATION CHART on page 5.

The following tools (not included) are required for assembly:

• Two adjustable wrenches

• One rubber mallet

• One standard screwdriver

• One Phillips screwdriver

•Lubricant, such as grease or petroleum jelly, and soapy water.

Assembly will be more convenient if you have a socket set, a set of open-end or closed-end wrenches, or a set of ratchet wrenches.

1.Before beginning, make sure you understand the information in the box above. Note: Some parts described in the assembly steps may be pre-assembled.

Press a 60mm Square Inner Cap (55) into each end of a Base (7). Attach the Base to the indicat- ed end of the Base Crossbar (20) using a Support Plate (57), two M10 x 80mm Bolts (41), and two M10 Nylon Locknuts (11). Do not tight- en the Nylon Locknuts yet.

Attach the other Base (7) to the opposite side of the Base Crossbar (20) in the same manner.

2.Press a 60mm Square Inner Cap (55) into the end of the Rear Base (3). Attach the Rear Base and the Foot Plate (4) to the Base Crossbar (20) using two M10 x 80mm Bolts (41) and two M10 Nylon Locknuts (11). Do not tighten the Nylon

Locknuts yet.

1

 

 

 

 

41

57

55

 

 

 

 

 

 

7

 

11

 

 

 

55

 

 

 

 

 

 

11

 

 

 

20

2

 

 

 

 

 

11

55

 

 

 

 

 

 

3

 

 

 

11

 

 

 

20

41

 

4

 

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents QUESTIONS? Model No. IMBE53910 Serial NoCustomer HOT Line Table of Contents Important Precautions Before YOU Begin Right SidePart Identification Chart Assembly Make Things Easier for YourselfLocknuts yet Locknuts yet Make sure the Safety Spotters are oriented exactly as shown Tighten the M8 x 20mm Screws 50 used in steps 6Weight Carriage and the Rear Upright are ori- ented as shown Tighten all Nylon Locknuts 11 used in stepsLocknut the Pulley must be able to turn freely Page Do not tighten the M10 Nylon Locknuts 11 yet Page Weight Tube Adjustments Using the Locking BARUsing the Safety Spotters Adjusting the Seat Attaching Weights to the Barbell or the Weight CarriageUsing Olympic Weights on the LEG Lever Tightening the CablesAdjusting the PAD Tubes Using the Curl PADAdjusting the Backrest Exercise Guidelines Muscle Chart Cooling DownStaying Motivated Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT Remove this Part LIST/EXPLODED Drawing from the Manual Part LIST-Model No. IMBE53910 Qty Description8941

IMBE53910 specifications

The Image IMBE53910 is an advanced camera module designed for demanding imaging applications. This compact yet powerful device is primarily aimed at embedded systems, robotics, and areas requiring high fidelity imaging in a small form factor. Built to meet the needs of modern technology while providing exceptional performance, the IMBE53910 incorporates a variety of features and technologies that enhance its functionality.

One of the standout features of the IMBE53910 is its high-resolution imaging capability. With a resolution of up to 5 megapixels, this camera module provides crisp and detailed images that are essential for applications such as machine vision and surveillance. The advanced optics integrated within the design ensure sharp focus and vibrant color reproduction, making it suitable for live video streaming and high-definition photography.

The IMBE53910 utilizes a state-of-the-art CMOS sensor, benefiting from low power consumption characteristics while maintaining high-quality image output. This technology not only reduces the energy requirements of devices using this module but also allows for longer operational times, making it ideal for battery-powered applications.

In terms of connectivity, the IMBE53910 offers flexible interface options. With support for various communication protocols, including USB, SPI, and I2C, it can easily integrate into a diverse range of systems. This versatility is a significant advantage, allowing engineers and developers to incorporate the IMBE53910 into both existing and new projects without extensive modifications.

Moreover, the camera module is equipped with advanced image processing capabilities. Features such as automatic white balance, exposure control, and image enhancement algorithms help optimize captured images in real-time, allowing for superior performance under varying lighting conditions. These intelligent algorithms contribute to the overall ease of use, enabling quick setup and operation.

Robust housing ensures durability and protection for the internal components, making the IMBE53910 suitable for use in challenging environments. This resilience extends the operational lifespan of the camera, an essential factor for applications in industrial and outdoor settings.

Overall, the Image IMBE53910 is a feature-rich camera solution that caters to various imaging needs, providing high resolution and advanced processing technologies in a compact format. Its blend of performance, versatility, and durability makes it a top choice for engineers and developers in the field of imaging technology.
Top Page Image Contents