JVC LVT1040-003A manual Removing the Speaker Grills SP-FSX1, Connecting a Powered Subwoofer

Page 11

Getting Started

Removing the Speaker Grills (SP-FSX1)

The speaker grills can be removed.

When removing:

1. Pull the bottom towards you with your fingers.

2. Also pull the top towards you.

When attaching the speaker grills:

Attach the speaker grills as shown in the diagram.

Connecting a Powered Subwoofer

Connect a signal cord (not supplied) between the System’s SUBWOOFER terminal and the input terminal of an external sub- woofer. (For the details of connection, please refer to the user’s manual of the external equipment.)

Subwoofer (not supplied)

Signal cord (not supplied)

Connecting an External Equipment

Connect signal cords (not supplied) between the System’s LINE IN/OUT terminals and the output/input terminals of the ex- ternal MD recorder, tape deck, etc. (For the details of connection, please refer to the user’s manual of the external equipment.) You can then listen to the external source through the System or record the System’s CD player or tuner to the external unit.

Signal cord

(not supplied)

Pin-plug x 2

STEREO mini plug

MD recorder or tape deck (not supplied)

	STEREO mini plug

			Pin-plug x 2
	Signal cord		Pin-plug x 2
	Signal cord
	(not supplied)

8

Image 11

Contents FS-X1/FS-X3 Important for Laser Products Above ALL How This Manual Is Organized FeaturesIntroduction Table of Contents Troubleshooting Care And Maintenance Specifications Getting Started AccessoriesHow To Put Batteries In the Remote Control Using the Remote ControlUsing the Coaxial Type Connector Not Supplied Connecting the FM AntennaUsing the Supplied Wire Antenna Connecting the AM MW Antenna Connecting the Speakers SP-FSX1/SP-FSX3 When attaching the speaker grills Connecting a Powered SubwooferConnecting an External Equipment When removingAutomatic Power On Connecting an MD Recorder, etc Optical Digital OutputChanging the Source Turning the Power On and OffBasic Operations Fade-out Muting Fade Muting Adjusting the Brightness Dimmer at Power OnPower Saving Mode Dimmer at Power Off Adjusting the VolumeEntering the Number with the Remote Control Numeric Keys No signal conditionTo disable the A.P.off function Auto Power Off A.P.offOne Touch Radio Using the TunerTuning In a Station Select a station using one of the follow- ing methodsBeat Cut AM MW Reception Presetting StationsTo Change the FM Reception Mode To change the preset stations, repeat the samePress the PTY Search button within approx seconds again Receiving FM Stations with RDSTo search for a program by PTY codes Info AlarmNews AffairsTest function Alarm functionQuickest Way To Start a CD Is With the One Touch Operation Using the CD PlayerWhen playing a CD-R or CD-RW To Insert a CDProgramming the Playing Order of the Tracks Program Play Basics of Using the CD Player Normal PlayTo Unload a CD Repeat to program the other tracks Press the CD 6button on the Remote ControlTo Modify the Program Random PlayTurn off the system Repeating TracksLocking the CD door Unlocking the CD doorTo exit the source LINE, select other source e.g. CD Using External EquipmentsListening to External Equipment Changing the Equipment’s NameRecording the System’s Source to External Equipment Adjusting the Input LevelWhen the source is LINE, press and hold the SET button Press the SET button to finish the adjustmentPress the 3 or 2 button to set the hour Using the TimersSetting the Clock Press the CLOCK/TIMER buttonCorrecting the Clock Setting the Daily TimerPerform steps 2 to 5 in Setting the Clo- ck on Showing the Clock DisplaySelecting the music source Setting the on time ExampleSetting the OFF time Example Select the Fade function Turning the Daily Timer On and OffSetting the volume level Press the Cancel buttonWait for a few seconds Setting the Sleep TimerTimer Priority During playback a source, press the Sleep buttonAction TroubleshootingSymptom Possible CauseCare And Maintenance Specifications 0403MNMCREJEM