JVC LVT1040-003A manual Turning the Daily Timer On and Off, Setting the volume level

Page 30

Using the Timers

5 Setting the volume level.

Press the 3 or 2 button to select the volume level (VOLUME 1-50), then press the SET button.

6 Select the FADE function.

Press the 3 or 2 button to select either “FADE” (fades in at power on) or “NoFADE” (does not fade in).

7 Press the SET button.

The timer setting is completed, and the “DAILY” indi- cator stops blinking and remains lit. Each setting you have made appears on the display in the order of ON time, OFF time, music source, volume and fading. Then, the display returns to the display before you set the timer.

8 Press the STANDBY/ON button to turn off the System.

The Clock indicator ( ) and “DAILY” indicator are lit on the display, showing that the Daily Timer is set to on.

To change the timer setting, repeat the setting proce-

dure from the beginning.

When the timer ON-time comes:

The following operation will be automatically repeated every- day.

When the timer ON-time comes, the System automati- cally turns on. The “DAILY” indicator blinks, and then “DAILY TIMER” and “TIMER STANDBY” alternate for a while. After that, the music source you have set is played. The “DAILY” indicator blinks during timer operation. In the case of MELODY, its title scrolls on the display.

When the timer OFF-time comes, “DAILY TIMER” and “OFF” alternate for a while. Then, the System automati- cally turns off and the “DAILY” indicator remains lit.

Selectable Melodies

When you select the melody as the source in step 4, you can use one of the following melodies.

MELODY 1:Twinkle Twinkle Little Star (by W.A.Mozart) MELODY 2:Grandfather’s Clock (by H.C.Work) MELODY 3:Csikos Post (by H.Necke)

MELODY 4:Farewell Song (by La chambre de Chopin) MELODY 5:Canon (by J.Pachelbel)

MELODY 6:Menuett (by J.S.Bach) MELODY 7:Humoresk (by A.Dvorak) MELODY 8:Serenade (by J.Haydn)

MELODY 9:Jesus, Joy Of Man’s Desiring (by J.S.Bach) MELODY10:Ravel’s Bolero (by Ravel)

When you select the melody as the source, only the title of the selected melody will appear on the display.

When a melody is set for the Daily Timer while playing back the CD, the CD will stop playing.

In step 4, the selected melody will be played back for your reference. However, if the melody is selected with the Sys- tem turned off, no melody will be heard.

During setting the melody, the source cannot be selected with the Source selector on the Unit or the source select button on the Remote Control.

If the System is already on when the timer ON-time comes, the Daily Timer does not work.

Turning the Daily Timer On and Off

Once you have set the Daily Timer, it is stored in memory. So, the Daily Timer will be activated at the same time every day until it is canceled.

To cancel the Daily Timer temporarily:

On the Remote Control

1 Press the CLOCK/TIMER button repeat- edly until the “DAILY ON?/DAILY OFF?” appears on the display.

The “DAILY” indicator blinks on the display.

2 Press the CANCEL button.

“DAILY OFF” appears and the “DAILY” indicator goes out.

To activate the canceled Daily Timer:

On the Remote Control

1 Press the CLOCK/TIMER button repeat- edly until the “DAILY ON?/DAILY OFF?” appears on the display.

The “DAILY” indicator blinks on the display.

2 Press the SET button.

The “DAILY” indicator remains lit. Each setting al- ready made appears on the display in the order of ON time, OFF time, music source, volume, and fading. Then the display returns to the original display.

“DAILY TIMER/NO SET” appears on the display before you enter the timer setting.

CAUTION:

If the System is unplugged, or a power fail- ure occurs, the timer setting will be lost. You will need to reset the clock first, then the timer.

27

Image 30
Contents FS-X1/FS-X3 Important for Laser Products Above ALL Features IntroductionHow This Manual Is Organized Table of Contents Troubleshooting Care And Maintenance Specifications Using the Remote Control AccessoriesHow To Put Batteries In the Remote Control Getting StartedConnecting the FM Antenna Using the Supplied Wire AntennaUsing the Coaxial Type Connector Not Supplied Connecting the AM MW Antenna Connecting the Speakers SP-FSX1/SP-FSX3 When removing Connecting a Powered SubwooferConnecting an External Equipment When attaching the speaker grillsConnecting an MD Recorder, etc Optical Digital Output Automatic Power OnTurning the Power On and Off Basic OperationsChanging the Source Adjusting the Volume Adjusting the Brightness Dimmer at Power OnPower Saving Mode Dimmer at Power Off Fade-out Muting Fade MutingAuto Power Off A.P.off No signal conditionTo disable the A.P.off function Entering the Number with the Remote Control Numeric KeysSelect a station using one of the follow- ing methods Using the TunerTuning In a Station One Touch RadioTo change the preset stations, repeat the same Presetting StationsTo Change the FM Reception Mode Beat Cut AM MW ReceptionReceiving FM Stations with RDS To search for a program by PTY codesPress the PTY Search button within approx seconds again Affairs AlarmNews InfoAlarm function Test functionTo Insert a CD Using the CD PlayerWhen playing a CD-R or CD-RW Quickest Way To Start a CD Is With the One Touch OperationBasics of Using the CD Player Normal Play To Unload a CDProgramming the Playing Order of the Tracks Program Play Random Play Press the CD 6button on the Remote ControlTo Modify the Program Repeat to program the other tracksUnlocking the CD door Repeating TracksLocking the CD door Turn off the systemChanging the Equipment’s Name Using External EquipmentsListening to External Equipment To exit the source LINE, select other source e.g. CDPress the SET button to finish the adjustment Adjusting the Input LevelWhen the source is LINE, press and hold the SET button Recording the System’s Source to External EquipmentPress the CLOCK/TIMER button Using the TimersSetting the Clock Press the 3 or 2 button to set the hourShowing the Clock Display Setting the Daily TimerPerform steps 2 to 5 in Setting the Clo- ck on Correcting the ClockSetting the on time Example Setting the OFF time ExampleSelecting the music source Press the Cancel button Turning the Daily Timer On and OffSetting the volume level Select the Fade functionDuring playback a source, press the Sleep button Setting the Sleep TimerTimer Priority Wait for a few secondsPossible Cause TroubleshootingSymptom ActionCare And Maintenance Specifications 0403MNMCREJEM