JVC LVT0900-008A, 0802MWMMDWJEM manual

Page 2

Warnings, Cautions and Others

Caution— button!

Disconnect the mains plug to shut the power off completely. The button in any position does not disconnect the mains line. The power can be remote controlled.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1.Do not remove screws, covers or cabinet.

2.Do not expose this appliance to rain or moisture.

CAUTION

•Do not block the ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)

•Do not place any naked flame sources, such as lighted candles, on the apparatus.

•When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly.

•Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

– G-1 –

Image 2

Contents Micro Component MD System UX-Z7MD-Consists of CA-UXZ7MD and SP-UXZ7MDPage Class Laser Product Precautions IntroductionContents Main unit Location of the ButtonsMain Unit Display window on the electronic swing panel Display windowRemote Control Pressing one of these buttons also turns on the unitUnpacking Connecting AntennasGetting Started FM antennaAM antenna Connecting SpeakersYou can connect the speakers using the speaker cords To connect an outdoor AM antennaTo connect external equipment Connecting External EquipmentTo remove the speaker grilles Speaker grilles are removable as illustrated belowPutting the Batteries into the Remote Control R6PSUM-3/AA15FRemote control Basic and Common OperationsTurning On/Off the Key-touch Tone Turning On the PowerSetting the Auto Power Off To check the clock time with tones Setting the ClockTo turn off the clock indication power save mode For private listening To increase the volume, turn Volume + / control ClockwiseIf Cannot Listen appears in the main display Reinforcing the Bass Sound To check the sound mode currently selected, pressSound indicator goes off from the display Selecting the Sound ModesTo create your favorite colors Setting the Display IlluminationTo select the illumination color To change the display brightnessRemote control Main unit Listening to FM and AM BroadcastsOn the remote control only Press FM Mode Tuning in to a StationTo change the FM reception mode To stop during searching, press ¢or 4or UP orPress the number buttons to select a preset number Presetting StationsTuning in to a Preset Station Press SETPlaying Back CDs CD-R/CD-RW Precautions on CD Playback Playing Back the Entire CD-Normal PlayProgram Play To go to another track directly using the number buttonsBasic CD Operations To stop playback for a momentRepeating Tracks-Repeat Play To check the program contentsPlaying at Random-Random Play To modify the programPlaying Back MDs Basic MD Operations To locate a particular point in a track during playOn the remote control only Load an MD Press MD 3/8, then About MD indicatorWhile playing or pausing On the main unit only To prohibit disc ejectionTracks are played at random To erase the entire program, press MD 0 to eject the MDTracks of the loaded MD will play at random To skip the playing track, press ¢To go to another track in the same group, press ¢ or Playing Tracks in a Group-Group PlayPress Group Skip or Group Skip to select a group To go to another group, press Group SkipSearching for Tracks to Play MD Title Search Playing Back Tapes To change the information shown in the main display To play both sides-Reverse modePlaying Back a Tape Listening to External Equipment Listening to External Equipment Adjusting the Audio Input LevelFor how to apply sound effects, see Recording To avoid erasing important recordings Before You Start Recording on an MDAbout the track marks To put a track mark manually while recording anAbout High-Speed Recording Precautions for performing long-hour stereo recordingStereo Long-Hour Recording Mdlp To check the remaining recording timeTo set LP-prefix addition mode Setting MD Recording ModesTo set the recording length mode To set Group recording modeRecording Other Sources onto an MD To record a single track during play or pauseTo protect your recordings To clean the heads, capstans, and pinch rollersBefore You Start Recording on a Tape To keep the best recording and playback sound qualityPrepare the source to record To record a disc Recording onto a TapeTo record a single track of a CD/MD during play To record an MDFor the tape Press REV.MODE to select the reverse modeWhen recording on an MD and a tape at the same time Press MD&TAPE RECEditing MDs Guidance-MD Group Functions Using MD Group functionsHow to make up Groups Classifying the tracks on an MDIntroducing Group Editing Functions Press ¢or 4to select the first track of a new group Forming a Group-FORM GRPress SET During playback Press ¢or 4to select the last track of the new groupPress ¢or 4to select the track When Cannot ENTRY! appears in stepAdding a Track to a Group-ENTRY GR Or Group SkipFunction on Dividing a Group-DIVIDE GRTo join the divided groups again, see the Join GR To divide the group again, see the Divide GR function When Cannot Join appears in stepJoining Two Groups-JOIN GR Moving a Group-MOVE GR Dissolving All Groups-UNGR ALL To cancel the setting, press CancelUngrouping Tracks-UNGROUP Erasing Tracks in a Group-ERASE GR Introducing Track Editing Functions Press ¢or 4to select the track you want to divide Press or to precisely adjust the dividing pointDividing a Track-DIVIDE To join the divided tracks again, see the Join functionTo divide the joined tracks, see the Divide function on When the track belongs to a groupJoining Two Tracks-JOIN If Cannot Join appears in stepMoving a Track-MOVE Press ¢or 4to select the track you want to movePress SET Press ¢or 4to select the track you want to erase Erasing Tracks-ERASEErasing All Tracks-ALL Erase For the group title Press or to change the title entry modeAssigning Titles to an MD For the disc and track titlePress Enter to finish the current title entry Press Cancel to exit from the title entry modeRepeat steps 5 1 and 5 2 to enter other characters For the disc titleMake sure that the character you want to change is flashing Changing the TitleYou can make a correction or change the title Using the Timers Using Recording Timer How Recording Timer actually worksTo turn off the Recording Timer after its setting is done Using Daily TimerHow Daily Timer actually works To turn on the Recording Timer againVolume setting appears in the main display To turn off the Daily Timer after its setting is doneTo turn on the Daily Timer again If the unit is kept turned on when the timer-on time comesHow Sleep Timer actually works Using Sleep TimerTimer Priority Maintenance MD Disc Types Utoc User Table Of ContentsAdditional Information Atrac Adaptive TRansform Acoustic Coding/ATRAC3Hcms High-speed Copy Management System Symptoms CauseScms Serial Copy Management System MD limitationsCannot REC x1 or x2 only CD/MD MessagesCannot REC x1 REC only Message Troubleshooting SymptomSpecifications Amplifier Section-CA-UXZ7MDVictor Company of JAPAN, Limited