JVC LVT0900-008A Joining Two Tracks-JOIN, To divide the joined tracks, see the Divide function on

Joining Two Tracks—JOIN

This function allows you to join two adjacent tracks into one track.

When the tracks have their own titles, the title of the preceding track is reassigned to the joined track. Once two tracks are joined, the other tracks and/or the groups are renumbered.

•To stop any time during the editing process before step 6, press TITLE/EDIT.

On the remote control ONLY:

In the following example, the process is explained from the very first—that is, inserting a disc. You can also edit an MD during playback (in Normal play mode).

1 Insert an MD you want to edit into the MD loading slot.

2 Press TITLE/EDIT repeatedly until “JOIN ?” appears in the main display.

•If the loaded MD has no track, “JOIN ?” will not appear.

•If you want to stop this editing process, press

CANCEL.

3 Press SET.

•If the loaded MD has only one track, you cannot go to the following steps.

4 Press ¢or 4to select the two adjacent tracks you want to join.

•You can select the tracks using the number buttons*. In this case, the selected track starts playing repeatedly.

Ex.: When tracks 2 and 3 are selected.

*Select the succeeding track of two tracks when you use the number buttons.

5 Press SET.

•To cancel the setting, press CANCEL, then repeat from step 4.

6 Press ENTER.

“EDITING” appears in the main display for a while, then “WRITING” and the MD REC indicator flash while the editing you have made is being recorded on the MD.

To divide the joined tracks, see the DIVIDE function on

page 52.

If “CANNOT JOIN” appears in step 5

You cannot join the following tracks.

•Tracks recorded using different recording length modes (SP, LP2, LP4). (See page 35.)

•Digital-recording tracks and analog-recording tracks.

•Tracks recorded using monaural long recording method (not possible on this unit) and stereo-recording tracks.

When the track belongs to a group

If the preceding track of two tracks you want to join belongs to a group, the newly joined track will belong to that group. On the other hand, if the preceding track does not belong to any group, the newly joined track will not belong to any group even if the succeeding track belongs to a group.

– 53 –