JVC 0802MWMMDWJEM, LVT0900-008A manual Moving a Group-MOVE GR

Page 51

Moving a Group—MOVE GR

This function allows you to move a group.

Once a group is moved, the tracks and the other groups are renumbered.

•To stop any time during the editing process before step 8, press GROUP TITLE/EDIT.

On the remote control ONLY:

In the following example, the process is explained from the very first—that is, inserting a disc. You can also edit an MD during playback (in Normal play mode).

1 Insert an MD you want to edit into the MD loading slot.

2 Press GROUP TITLE/EDIT repeatedly until “MOVE GR ?” appears in the main display.

•If you want to stop this editing process, press

CANCEL.

3 Press SET.

•If the loaded MD has only one or no group, you cannot go to the following steps.

•During playback:

The group number of the currently playing track will appear. If the track does not belong to any group, the group number will be indicated by “– –.”

4 Press GROUP SKIP or GROUP SKIP to select the group you want to move.

Ex.: When group 3 is selected.

5 Press SET.

•To cancel the setting, press CANCEL, then repeat from step 4.

6 Press GROUP SKIP or GROUP SKIP to select the position where you want to move the group.

Ex.: When group 3 is moved to group 10.

7 Press SET.

•To cancel the setting, press CANCEL, then repeat from step 4.

8 Press ENTER.

“EDITING” appears in the main display for a while, then “WRITING” and the MD REC indicator flash while the editing you have made is being recorded on the MD.

– 48 –

Image 51

Contents UX-Z7MD-Consists of CA-UXZ7MD and SP-UXZ7MD Micro Component MD SystemPage Class Laser Product Introduction PrecautionsContents Location of the Buttons Main UnitMain unit Display window Display window on the electronic swing panelPressing one of these buttons also turns on the unit Remote ControlFM antenna Connecting AntennasGetting Started UnpackingTo connect an outdoor AM antenna Connecting SpeakersYou can connect the speakers using the speaker cords AM antennaSpeaker grilles are removable as illustrated below Connecting External EquipmentTo remove the speaker grilles To connect external equipmentR6PSUM-3/AA15F Putting the Batteries into the Remote ControlBasic and Common Operations Remote controlTurning On the Power Setting the Auto Power OffTurning On/Off the Key-touch Tone Setting the Clock To turn off the clock indication power save modeTo check the clock time with tones To increase the volume, turn Volume + / control Clockwise If Cannot Listen appears in the main displayFor private listening Selecting the Sound Modes To check the sound mode currently selected, pressSound indicator goes off from the display Reinforcing the Bass SoundTo change the display brightness Setting the Display IlluminationTo select the illumination color To create your favorite colorsListening to FM and AM Broadcasts Remote control Main unitTo stop during searching, press ¢or 4or UP or Tuning in to a StationTo change the FM reception mode On the remote control only Press FM ModePress SET Presetting StationsTuning in to a Preset Station Press the number buttons to select a preset numberPlaying Back CDs CD-R/CD-RW Playing Back the Entire CD-Normal Play Precautions on CD PlaybackTo stop playback for a moment To go to another track directly using the number buttonsBasic CD Operations Program PlayTo modify the program To check the program contentsPlaying at Random-Random Play Repeating Tracks-Repeat PlayPlaying Back MDs To locate a particular point in a track during play Basic MD OperationsOn the main unit only To prohibit disc ejection About MD indicatorWhile playing or pausing On the remote control only Load an MD Press MD 3/8, thenTo skip the playing track, press ¢ To erase the entire program, press MD 0 to eject the MDTracks of the loaded MD will play at random Tracks are played at randomTo go to another group, press Group Skip Playing Tracks in a Group-Group PlayPress Group Skip or Group Skip to select a group To go to another track in the same group, press ¢ orSearching for Tracks to Play MD Title Search Playing Back Tapes To play both sides-Reverse mode Playing Back a TapeTo change the information shown in the main display Listening to External Equipment Adjusting the Audio Input Level For how to apply sound effects, seeListening to External Equipment Recording To put a track mark manually while recording an Before You Start Recording on an MDAbout the track marks To avoid erasing important recordingsTo check the remaining recording time Precautions for performing long-hour stereo recordingStereo Long-Hour Recording Mdlp About High-Speed RecordingTo set Group recording mode Setting MD Recording ModesTo set the recording length mode To set LP-prefix addition modeTo record a single track during play or pause Recording Other Sources onto an MDTo keep the best recording and playback sound quality To clean the heads, capstans, and pinch rollersBefore You Start Recording on a Tape To protect your recordingsTo record an MD Recording onto a TapeTo record a single track of a CD/MD during play Prepare the source to record To record a discPress MD&TAPE REC Press REV.MODE to select the reverse modeWhen recording on an MD and a tape at the same time For the tapeEditing MDs Classifying the tracks on an MD Using MD Group functionsHow to make up Groups Guidance-MD Group FunctionsIntroducing Group Editing Functions Press ¢or 4to select the last track of the new group Forming a Group-FORM GRPress SET During playback Press ¢or 4to select the first track of a new groupOr Group Skip When Cannot ENTRY! appears in stepAdding a Track to a Group-ENTRY GR Press ¢or 4to select the trackDividing a Group-DIVIDE GR To join the divided groups again, see the Join GRFunction on When Cannot Join appears in step Joining Two Groups-JOIN GRTo divide the group again, see the Divide GR function Moving a Group-MOVE GR To cancel the setting, press Cancel Ungrouping Tracks-UNGROUPDissolving All Groups-UNGR ALL Erasing Tracks in a Group-ERASE GR Introducing Track Editing Functions To join the divided tracks again, see the Join function Press or to precisely adjust the dividing pointDividing a Track-DIVIDE Press ¢or 4to select the track you want to divideIf Cannot Join appears in step When the track belongs to a groupJoining Two Tracks-JOIN To divide the joined tracks, see the Divide function onPress ¢or 4to select the track you want to move Moving a Track-MOVEErasing Tracks-ERASE Erasing All Tracks-ALL ErasePress SET Press ¢or 4to select the track you want to erase For the disc and track title Press or to change the title entry modeAssigning Titles to an MD For the group titleFor the disc title Press Cancel to exit from the title entry modeRepeat steps 5 1 and 5 2 to enter other characters Press Enter to finish the current title entryChanging the Title You can make a correction or change the titleMake sure that the character you want to change is flashing Using the Timers How Recording Timer actually works Using Recording TimerTo turn on the Recording Timer again Using Daily TimerHow Daily Timer actually works To turn off the Recording Timer after its setting is doneIf the unit is kept turned on when the timer-on time comes To turn off the Daily Timer after its setting is doneTo turn on the Daily Timer again Volume setting appears in the main displayUsing Sleep Timer Timer PriorityHow Sleep Timer actually works Maintenance Atrac Adaptive TRansform Acoustic Coding/ATRAC3 Utoc User Table Of ContentsAdditional Information MD Disc TypesMD limitations Symptoms CauseScms Serial Copy Management System Hcms High-speed Copy Management SystemCD/MD Messages Cannot REC x1 REC onlyCannot REC x1 or x2 only Message Symptom TroubleshootingAmplifier Section-CA-UXZ7MD SpecificationsVictor Company of JAPAN, Limited