JVC LVT0900-008A, 0802MWMMDWJEM manual Ungrouping Tracks-UNGROUP, Dissolving All Groups-UNGR ALL

Page 52

Ungrouping Tracks—UNGROUP

This function allows you to dissolve a group. You cannot erase the tracks using this function. Once tracks are ungrouped, the other groups are renumbered.

•To stop any time during the editing process before step 6, press GROUP TITLE/EDIT.

On the remote control ONLY:

In the following example, the process is explained from the very first—that is, inserting a disc. You can also edit an MD during playback (in Normal play mode).

1 Insert an MD you want to edit into the MD loading slot.

2 Press GROUP TITLE/EDIT repeatedly until “UNGROUP ?” appears in the main display.

•If you want to stop this editing process, press

CANCEL.

3 Press SET.

•If the loaded MD has no group, you cannot go to the following steps.

•During playback:

The group number of the currently playing track will appear. If the track does not belong to any group, the group number will be indicated by “– –.”

4 Press GROUP SKIP or GROUP SKIP to select the group you want to dissolve.

Ex.: When group 3 is selected.

5 Press SET.

•To cancel the setting, press CANCEL, then repeat from step 4.

6 Press ENTER.

“EDITING” appears in the main display for a while, then “WRITING” and the MD REC indicator flash while the editing you have made is being recorded on the MD.

Dissolving All Groups—UNGR ALL

This function allows you to dissolve all the groups. You cannot erase the tracks using this function.

•To stop any time during the editing process before step 4, press GROUP TITLE/EDIT.

On the remote control ONLY:

In the following example, the process is explained from the very first—that is, inserting a disc. You can also edit an MD during playback (in Normal play mode).

1 Insert an MD you want to edit into the MD loading slot.

2 Press GROUP TITLE/EDIT repeatedly until “UNGR ALL ?” appears in the main display.

•If you want to stop this editing process, press

CANCEL.

3 Press SET.

• To cancel the setting, press CANCEL.

4 Press ENTER.

“EDITING” appears in the main display for a while, then “WRITING” and the MD REC indicator flash while the editing you have made is being recorded on the MD.

– 49 –

Image 52

Contents Micro Component MD System UX-Z7MD-Consists of CA-UXZ7MD and SP-UXZ7MDPage Class Laser Product Precautions IntroductionContents Main Unit Location of the ButtonsMain unit Display window on the electronic swing panel Display windowRemote Control Pressing one of these buttons also turns on the unitConnecting Antennas Getting StartedUnpacking FM antennaConnecting Speakers You can connect the speakers using the speaker cordsAM antenna To connect an outdoor AM antennaConnecting External Equipment To remove the speaker grillesTo connect external equipment Speaker grilles are removable as illustrated belowPutting the Batteries into the Remote Control R6PSUM-3/AA15FRemote control Basic and Common OperationsSetting the Auto Power Off Turning On the PowerTurning On/Off the Key-touch Tone To turn off the clock indication power save mode Setting the ClockTo check the clock time with tones If Cannot Listen appears in the main display To increase the volume, turn Volume + / control ClockwiseFor private listening To check the sound mode currently selected, press Sound indicator goes off from the displayReinforcing the Bass Sound Selecting the Sound ModesSetting the Display Illumination To select the illumination colorTo create your favorite colors To change the display brightnessRemote control Main unit Listening to FM and AM BroadcastsTuning in to a Station To change the FM reception modeOn the remote control only Press FM Mode To stop during searching, press ¢or 4or UP orPresetting Stations Tuning in to a Preset StationPress the number buttons to select a preset number Press SETPlaying Back CDs CD-R/CD-RW Precautions on CD Playback Playing Back the Entire CD-Normal PlayTo go to another track directly using the number buttons Basic CD OperationsProgram Play To stop playback for a momentTo check the program contents Playing at Random-Random PlayRepeating Tracks-Repeat Play To modify the programPlaying Back MDs Basic MD Operations To locate a particular point in a track during playAbout MD indicator While playing or pausingOn the remote control only Load an MD Press MD 3/8, then On the main unit only To prohibit disc ejectionTo erase the entire program, press MD 0 to eject the MD Tracks of the loaded MD will play at randomTracks are played at random To skip the playing track, press ¢Playing Tracks in a Group-Group Play Press Group Skip or Group Skip to select a groupTo go to another track in the same group, press ¢ or To go to another group, press Group SkipSearching for Tracks to Play MD Title Search Playing Back Tapes Playing Back a Tape To play both sides-Reverse modeTo change the information shown in the main display Listening to External Equipment For how to apply sound effects, see Adjusting the Audio Input LevelListening to External Equipment Recording Before You Start Recording on an MD About the track marksTo avoid erasing important recordings To put a track mark manually while recording anPrecautions for performing long-hour stereo recording Stereo Long-Hour Recording MdlpAbout High-Speed Recording To check the remaining recording timeSetting MD Recording Modes To set the recording length modeTo set LP-prefix addition mode To set Group recording modeRecording Other Sources onto an MD To record a single track during play or pauseTo clean the heads, capstans, and pinch rollers Before You Start Recording on a TapeTo protect your recordings To keep the best recording and playback sound qualityRecording onto a Tape To record a single track of a CD/MD during playPrepare the source to record To record a disc To record an MDPress REV.MODE to select the reverse mode When recording on an MD and a tape at the same timeFor the tape Press MD&TAPE RECEditing MDs Using MD Group functions How to make up GroupsGuidance-MD Group Functions Classifying the tracks on an MDIntroducing Group Editing Functions Forming a Group-FORM GR Press SET During playbackPress ¢or 4to select the first track of a new group Press ¢or 4to select the last track of the new groupWhen Cannot ENTRY! appears in step Adding a Track to a Group-ENTRY GRPress ¢or 4to select the track Or Group SkipTo join the divided groups again, see the Join GR Dividing a Group-DIVIDE GRFunction on Joining Two Groups-JOIN GR When Cannot Join appears in stepTo divide the group again, see the Divide GR function Moving a Group-MOVE GR Ungrouping Tracks-UNGROUP To cancel the setting, press CancelDissolving All Groups-UNGR ALL Erasing Tracks in a Group-ERASE GR Introducing Track Editing Functions Press or to precisely adjust the dividing point Dividing a Track-DIVIDEPress ¢or 4to select the track you want to divide To join the divided tracks again, see the Join functionWhen the track belongs to a group Joining Two Tracks-JOINTo divide the joined tracks, see the Divide function on If Cannot Join appears in stepMoving a Track-MOVE Press ¢or 4to select the track you want to moveErasing All Tracks-ALL Erase Erasing Tracks-ERASEPress SET Press ¢or 4to select the track you want to erase Press or to change the title entry mode Assigning Titles to an MDFor the group title For the disc and track titlePress Cancel to exit from the title entry mode Repeat steps 5 1 and 5 2 to enter other charactersPress Enter to finish the current title entry For the disc titleYou can make a correction or change the title Changing the TitleMake sure that the character you want to change is flashing Using the Timers Using Recording Timer How Recording Timer actually worksUsing Daily Timer How Daily Timer actually worksTo turn off the Recording Timer after its setting is done To turn on the Recording Timer againTo turn off the Daily Timer after its setting is done To turn on the Daily Timer againVolume setting appears in the main display If the unit is kept turned on when the timer-on time comesTimer Priority Using Sleep TimerHow Sleep Timer actually works Maintenance Utoc User Table Of Contents Additional InformationMD Disc Types Atrac Adaptive TRansform Acoustic Coding/ATRAC3Symptoms Cause Scms Serial Copy Management SystemHcms High-speed Copy Management System MD limitationsCannot REC x1 REC only CD/MD MessagesCannot REC x1 or x2 only Message Troubleshooting SymptomSpecifications Amplifier Section-CA-UXZ7MDVictor Company of JAPAN, Limited