JVC 0802MWMMDWJEM, LVT0900-008A Changing the Title, You can make a correction or change the title

You can assign titles during play or recording

•During play: Entering a track title

The MD recorder repeats playback of the current track until you press ENTER in step 6 above. When you press ENTER, the next track will be played.

Entering a disc title

The MD recorder repeats playback of all tracks of the MD until you press ENTER in step 6 above. When you press ENTER, the MD recorder enters the track title entry mode.

Entering a group title

The MD recorder repeats playback of the tracks in the group until you press ENTER in step 6. When you press ENTER, the MD recorder enters the next group title entry mode.

•During recording: Entering a track title

The MD recorder continues recording even after you press ENTER in step 6 above. When you press ENTER, a track title is assigned to the track where you have started the title entry. If you do not press ENTER before recording ends, the track title assigned will be canceled.

•During CD Synchronized Recording (see page 36):

You can assign the disc title, and 16 track titles one after another as recording goes on. The track titles you have entered are automatically assigned to the tracks recorded on the MD in sequential order. If you enter 17th track title or more, they are ignored.

When you unplug the AC power cord or if a power failure occurs before step 8

The editing you have made is not recorded on the MD.

Available symbols are as follows:

(Blank)

Changing the Title

You can make a correction or change the title.

1 Follow steps 1 to 4 on page 56.

2 Select the character you want to correct, by pressing or .

•Make sure that the character you want to change is flashing.

3 Press CANCEL to delete the character you have selected in the above step.

4 Input the correct character, referring to step 5 on the previous page.

5 Repeat steps 2 to 4 of the current procedure to correct more characters.

6 Press ENTER to finish correcting the title.

• If you want to correct another title, select another title

entry mode by pressingor , press SET, then repeat from step 2 above.

•If you want to finish the correction, go to the next step.

7 Press MD 0 on the main unit to eject the MD.

“WRITING” and the MD REC indicator flash while the editing you have made is being recorded on the MD.

To erase all the characters, press CANCEL repeatedly in step 3 above to erase all the characters, then go to step 6.

– 58 –