Dell XPS 600 owner manual Installing a Floppy Drive, 103

Installing a Floppy Drive

1Follow the procedures in "Before You Begin" on page 69.

2If you are replacing a drive and the new drive does not have the bracket rails attached, remove the rails from the old drive by removing the two screws that secure each rail to the drive. Attach the bracket to the new drive by aligning the screw holes on the drive with the screw holes on the bracket rails and then inserting and tightening all four screws (two screws on each rail).

drive

bracket rails (2)

screws (4)

3Gently slide the drive into place until the tabs securely click into position.

Removing and Installing Parts

103