Drives

Your computer supports a combination of these devices:

Up to three hard drives

Optional floppy drive

Up to two CD or DVD drives

Optional media card reader

floppy drive

CD/DVD drive

media card reader (optional)

CD/DVD drive (optional)

hard drive(s)

General Installation Guidelines

Connect serial ATA hard drives to the SATA0 - SATA3 connectors on the system board. Connect CD/DVD drives to the IDE connector.

When you connect two IDE devices to a single IDE interface cable and configure them for the cable select setting, the device attached to the last connector on the interface cable is the primary or the boot device (drive 0), and the device attached to the middle connector on the interface cable is the secondary device (drive 1). See the drive documentation in your upgrade kit for information on configuring devices for the cable select setting.

Removing and Installing Parts

95

Page 95
Image 95
Dell XPS 600 Drives, General Installation Guidelines, Floppy drive CD/DVD drive Media card reader optional, Hard drives