FARGO electronic CD Color Printer manual C.INSTALLING THE 32-BITPRINT SPOOLER FOR WINDOWS

6.Select the Install button.

7.Insert the supplied Printer Driver diskette into your computerÕs disk drive. If you insert the diskette in a drive other than the A: drive displayed in the Install Driver dialog box, you must change the drive designation. Select the OK button.

8.ÒCD Color PrinterÓ should now be listed in the Add Unlisted or Updated Printer dialog box. Select the OK button. Your PCÕs disk drive will now load the printer driver. Depending upon your computer, loading will take about 10 to 20 seconds.

9.Select the Set As Default Printer button in the Printers window. The CD Color Printer has now been selected as your default (main) printer. If you wish to use another printer later, you must de-select the CD Color Printer and switch back to the other printerÕs driver.

10.Finally, select the Connect button. Check that the box called Fast Printing Direct to Port is selected. Although this option is not necessary, it helps optimize printer driver speed and performance. Select OK to exit the Connect window. Select Close to exit the Printers window. See Part D of this section for information on printer driver settings and options.

C.INSTALLING THE 32-BIT PRINT SPOOLER FOR WINDOWS 95

Your CD Color Printer ships with a print utility program called the 32-Bit Print Spooler. This print spooler is for use only with Windows 95. Once installed, the print spooler is able to process your print jobs and send them to the printer at consistently faster speeds than if sending print jobs through the Windows 95 print spooler. This is especially true if printing from a somewhat slower computer.

The 32-Bit Print Spooler is located on a single diskette and installs just like any other standard Windows 95 application program. To install the 32-Bit Print Spooler, refer to the following:

1.Insert the 32-Bit Print Spooler diskette into your computerÕs disk drive.

Using the CD Color Printer with Windows 15