Dell XPS 600 owner manual Drive Bracket rails Screws, Hard-drive cable Tabs Power cable

drive

bracket rails (2)

screws (4)

7If you are adding a second hard drive, remove the first hard drive from the upper bay and install it in the lower bay:

a Disconnect the power and the hard-drive cables from the back of the first hard drive. b Press in the two rail tabs and pull the first hard drive out of the upper bay.

c Gently slide the first hard drive into the lower bay until it clicks into place.

d Reconnect the power and hard-drive cables to the back of the first hard drive.

8Install the hard drive into the computer by gently sliding the drive into place until the tabs securely click into position.

NOTE: If you are installing a hard drive in the lower bay, place the drive in the bay so that the power connector is on the left-hand side (opposite of the top hard drive)

hard-drive cable	tabs (2)
power cable
	hard drive

system board connector

Removing and Installing Parts

99