Dell XPS 600 owner manual Power Problems

R U N T H E H A R D W A R E TR O U B L E S H O O T E R — See "Resolving Software and Hardware Incompatibilities" on page 64.

Power Problems

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.

I F T H E P O W E R L I G H T I S G R E E N A N D T H E C O M P U T E R I S N O T R E S P O N D I N G — See "Diagnostic Lights"

on page 55.

I F T H E P O W E R L I G H T I S B L I N K I N G G R E E N — The computer is in standby mode. Press a key on the keyboard, move the mouse, or press the power button to resume normal operation.

I F T H E P O W E R L I G H T I S O F F — The computer is either turned off or is not receiving power.

•Reseat the power cable into both the power connector on the back of the computer and the electrical outlet.

•If the computer is plugged into a power strip, ensure that the power strip is plugged into an electrical outlet and that the power strip is turned on. Also bypass power protection devices, power strips, and power extension cables to verify that the computer turns on properly.

•Ensure that the electrical outlet is working by testing it with another device, such as a lamp.

•Ensure that the main power cable and front panel cable are securely connected to the system board (see "System Board Components" on page 78).

I F T H E P O W E R L I G H T I S B L I N K I N G A M B E R — The computer is receiving electrical power, but an internal power problem might exist.

• Ensure that the voltage selection switch is set to match the AC power at your location (if applicable).

I F T H E P O W E R L I G H T I S S T E A D Y A M B E R — A device might be malfunctioning or incorrectly installed.

•Ensure that the processor power cable is securely connected to the system board power connector (POWER12V) (see "System Board Components" on page 78).

•Remove and then reinstall the memory modules (see "Memory" on page 79).

•Remove and then reinstall any cards (see "Removing PCI and PCI Express Cards" on page 89).

•Remove and then reinstall the graphics card, if applicable (see "Removing PCI and PCI Express Cards" on page 89).

Solving Problems

49