Dell XPS 600 owner manual Network Adapter and Sound Card Settings

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

9Connect any cables that should be attached to the card.

See the documentation for the card for information about the card cable connections.

NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug the cable into the computer.

retention arm

alignment bar

alignment guide

filler bracket

10Replace the computer

cover, reconnect the computer and devices to electrical outlets, and then turn them on.

11If you installed a sound card or a network adapter, see "Network Adapter and Sound Card Settings" on page 94.

12Install any drivers required for the card as described in the card documentation.

Network Adapter and Sound Card Settings

If you installed a sound card:

1Enter system setup, select Integrated Audio Controller, and then change the setting to Off.

2Connect external audio devices to the sound card connectors. Do not connect external audio devices to the microphone, speaker/headphone, or line-in connectors on the back panel.

If you removed a sound card:

1Enter system setup, select Integrated Audio Controller, and then change the setting to On.

2Connect external audio devices to the audio connectors on the back panel of the computer.

If you installed an add-innetwork adapter and want to disable the integrated network adapter:

1Enter system setup, select Integrated NIC Controller, and then change the setting to Off.

2Connect the network cable to the add-in network adapter connectors. Do not connect the network cable to the integrated connector on the back panel.

If you removed an add-in network connector:

1Enter system setup, select Integrated NIC Controller, and then change the setting to On.

2Connect the network cable to the integrated connector on the back panel of the computer.

94

Removing and Installing Parts